Spankahontis

I can't seem to find the right Runtime make, I've rolled back SKSE to 2.0.4 but i'm still getting the pop up, only now with 2.0.4 in the pop up/

The latest SKSE (v2.0.5) has been made obsolete with the latest Skyrim SE update. I get this annoying pop-up.

I had to Uninstall the Skyrim Hi-Res and reduce my Specs to lowest Settings, that gave me a 10fps boost, so Helgan intro goes at around 24-31fps including 20-30 mods added.

I went onto the Global drop down menu and unchecked useEffect and saved changes. exited and restarted Skyrim for the changes to take effect. Framerate hasn't changed.

Done, :) I have re-read through the Enbseries website. I have the Wrapper folder; I added the contents of that into the Skyrim Folder. I then took the ENBoost Patch 5.0 with the Nvidia_videocard folders and copy pasted the contents of the 4GB VRam folder (enblocal.ini) into the Main Skyrim Folder. I'm not getting anymore warnings and when I go onto the Skyrim main screen, it runs at apout 120 fps but again only 15-20fps at the beginning intro and 20-25 indoors. I can access the editor by Shift+Enter but i'm not sure what I need to look for to improve frame rates.

Success! they've been cleaned, I wasn't using 'remove identical to master records'. They've been fixed. Just need help with the ENB and I can start Patching the Game Files.

This is what the enblocal.ini looks like now. I can run Skyrim with Enboost installed, Memblock and Performance Monitor are working alongside it. But framerates are between 15-21 fps, it looks really slow, the lagging is noticeable. Weird thing is V-Ram isn't under too much strain, it's only over 1000 during the beginning intro and about 20-25fps indoors. Tried tweaking certain numbers and i'm not getting any improvements. All I have installed on M.O is all the Unofficial Patches, SKSE, I've made clean versions of Update, H.F, D.B,D.G, High-Res ESM's etc. LOOT has sorted them, no conflicts are detected. So I would say you might be right, all I can think of is certain parts are conflicting? ALSO... I'm getting this message when I start up a New Game.. Hardware Antiailiasing detected, some effects disabled In the top left corner, if it's in red then a warning?

Well I managed to get the game running with ENBoost I added all the files to the Skyrim Folder, so it was probably missing a file or 2? But the FPS was ridiculous 15 fps and tons of stuttering. As you can see from the Screenshot of the Monitor graph, everything was pushed too hard and the temperature rose to about 65 degrees in a few minutes. https://www.mediafire.com/view/zmcp5cwfb6b8ow7/Screenshot_2.jpeg

I think I know what i've done wrong with these, I 'Applied to filter', but didn't 'remove identical to master records', instead I pressed undelete and disable. I'll do this next time but at the moment I've started a fresh install of Skyrim, gone through all of everyones advice above and the checklist. I think altering something in the enblocal.ini is what's causing the crash to desktop to occur as I haven't started to install the mods. I only have the unofficial Skyrim/DB/HF/DG/Graphic improvements Patches, SKSE, Mem Block, Performance monitor up and running. I also have clean copies of Update.esm, dragonborn.esm, dawnguard.esm, Hearthfire.esm that Gamerpoets tutorial tells you to do when backing up TES5EDIT Files. UPDATE: Seems to be EnBoost itself that's causing the CTD, I get to Skyrims main menu with the notification that ENBoost is installed with the name of the designer and copyright etc. Then Default's editor, but I start a new game and it crashes.

I altered the numbers as it said in your post but when I start up a New Game it CTD's. one of them codes is causing it.

Some were already done, others needed to be edited, but I've saved them. I'm using Legendry Edition as well so hopefully this will help for mine. Short guide I made for myself: Troubleshooting CTD Is Skyrim Memory Patch being used (via Skyrim Script Extender or SSME)? Use Memory Blocks Log to verify I'm using SKSE, Memory Block is working but i'm still getting Frostfall scripts being shut down due to not enough memory and yet I only used up over 300MB of my 512MB Block allocation. Is ENBoost installed and working? Not 100% certain. I get the in-game message but a notification in red that the graphics are disabled. Do you get the in-game message that ENBoost is active? Yes, with the authors name. Are your ENBlocal.ini settings correct? I've altered the ini files to what people in this topic have recommended and i'm still getting scripts shutting down. Use Skyrim Performance Monitor to verify Are you using unorthodox INI tweaks? I followed GamerPoets ini tweaks tutorial Part 1 and 2. Are the Unofficial Patches installed correctly? Yes, I used LOOT to arrange them in the right build order. Are they checked in the mod list? Yes Are they in the correct priority order in the mod list? Yes Are they checked in the plugins list? Yes Do you have any active plugins that are missing a master? No Missing Master files have been alerted on MO, but LOOT has yellow boxed the following mods.. Moonpath.esm (Contains 1 ITM records), Inigo.esp (Contains 39 ITM records), moonpath_questdata.esp (Contains 1 ITM records). I used 'Apply Filtering for cleaning', followed by 'Undelete and Disable References' with TES5EDIT and these above errors wouldn't remove, I don't know how to edit these errors in the tree. Check for a warning icon in the plugins list before a plugin. No Warning Icons. Can TES5Edit successfully load all your plugins in one go? Yes, it just can't clean the above mods i've pointed out using the AFfC and UaDR methods I was advised to use. Start disabling mods and find which mod is causing CTD (Haven't tried this yet). Do any of your plugins have errors that cannot be resolved? Frostfall keeps running out of memory and disabling and reactivating itself and the 3 files above I can't clean with TES5EDIT. Test plugins with the Check for Errors option in TES5Edit Error Check for Inigo.esp Error Check for Moonpath.esm [00:00] Checking for Errors in [0C] moonpath.esm [00:01] All Done! Error Check for Moonpath_questdata.esp [00:00] Checking for Errors in [3A] moonpath_questdata.esp [00:00] All Done! Test patches first, as they are most likely to have outdated records due to mod version changes without patch update. Not all errors cause CTD Did you update/add a mod recently? If so, see if there are any issues with that mod or compatibility issue with it and your setup. Some mods will cause CTD due to a corrupt mesh. Only the above files

So i've altered VideoMemorySizeMb=4098 (If that's right?) Anything else that needs altering in enblocal.ini? This is how it's looking right now.

Apologies for the delay, had to sleep and stuff. The tweaks you asked me to add to Skyrim Performance Monitor worked It's reading the performance now. I made a Screenshot of the graph and this is what it was like before I closed down in Whiterun. https://www.mediafire.com/view/tw83iqpt3qr03wr/Screenshot_1.jpeg The GPU was going crazy, 98-100% of it's capacity. https://www.mediafire.com/view/qmk67ec5vickhqt/default_Skyrim_specs.jpg These are my specs that the Skyrim Launcher classes as my optimal settings when it scans my computer hardware. I'm trying to figure out the rest, not sure how to calculate the VRAM Hopefully the answer is in the Screenshot?

I have added the Wrapper files it tells me to extract into the main Skyrim folder and I get the notification in the intro screen (Top left corner) that ENboost is installed.But after that I get a red notification that PATCH SPEEDHACK Enboostlocal.ini is activated, Graphics have been disabled; Is this line below meant to be like this in the .ini file? I fear it may be incorrect, if so what am I supposed to enter into that entry..VideoMemorySizeMb=<integer in KB, multiples of 1024> ;Set to equal VRAM (32-bit) ;Set to [VRAM] + [System RAM] - [2048] (64-bit)Also, i've pointed the Skyrim performance monitor to mod manager's .exe And I've added the profile I am using in Mod Manager which is RON v2 and the main TESV.exe but lauching SKSE from Mod Manager doesn't get Skyrim Performance Manager to work. This is what my enblocal.ini looks like.

I've installed Skyrim Performance Monitor but I can only get it top work for Vanilla Skyrim. I followed Gophers installation guide but I load up Skyrim through SKSE and the counter in the top left corner doesn't appear. I've got C:\Users\???\Documents\my games\Skyrim\Skyrim.ini in the Skyrim ini file path. X:\Steam\SteamApps\common\Skyrim\TESV.exe in the Main Program File Path. X:\Steam\SteamApps\common\Skyrim\skse_loader.exe in the Skyrim Launcher File Path. Followed Gopher's tutorial.