User:Rootsrat/TheWitcher3 Return Of The White Wolf 110Update

Update Procedure for Game Version 1.10

FEEDBACK THREAD ON THE STEP FORUMS

PATCH 1.10

Overview

This is a major update of the Witcher 3: The Return Of The White Wolf modding guide. It requires many extra steps and attention to details than a usual update, including a full clean up and game reconfiguration. Therefore I decided to commit a separate page to document the process. There are several reasons for this major update: The Witcher 3 patch 1.10 is a massive 15GB downlad and includes over 600 fixes and improvements and it's required to play Hearts of Stone expansion. The detailed patch notes document is a 12 A4 pages long read! Link below. You should read it. No, really! All the DLC are now merged into a single download and a new download is available for users of Hearts of Stone game expansion. And Nexus Mod Manager, which is a mod manager software for Witcher 3 also had a major update recently that changed how the program works.

Due to all the above, this guide is also going through a major update to acclimate to this new modding environment.

Patch Notes

Patch notes for Witcher 3 version 1.10

SOFTWARE UPDATE PROCEDURE

Update the game

Backup essential files and clean up game folder

1. Navigate to \The Witcher 3 Wild Hunt\bin\x64 folder.

2. Delete these folders and files:

plugins 
dsound.dll

3. Run Witcher 3 Hunter's Config tool and uninstall ReShade if you use it. If you don't have the uninstall option (the program sometimes bugs out), follow this procedure:

Navigate to \The Witcher 3 Wild Hunt\bin\config\base\ReShade\YourReshadePresetName and take note of all the files
Navigate to E:\Program Files (x86)\The Witcher 3 Wild Hunt\bin\x64 and delete the same files

4.Navigate \The Witcher 3 Wild Hunt\ folder and make a backup of Mods folder somewhere on your disk

5. Delete the contents of Mods folder

6. Navigate to \Documents\The Witcher 3 folder and make a backup of these files:

input.settings
mods.settings
user.settings

7. Set all the files NOT to be read read-only.

Update the game to version 1.10

1. Open GOG Galaxy, expand MORE menu and select the update to 1.10 version.

2. Wait for the game to update.

3. Expand the MORE menu again and select Manage > Verify/Repair option, then wait for the process to finish.

4. Expand the MORE menu and select Configure option

5. Install both programs the DLCS INSTALLED section:

Free DLC Program 
Hearts of Stone

Verify the installation

1. Select PLAY button to verify if the game starts OK. You should see a new Hearts of Stone themed Main Menu.

2. Select Downloadable Content in the main menu and select Options. Confirm that the options are as follows:

Alternative Look For Yennefer - OFF (not lore friendly)
Alternative Look For Triss - ON (using a mod that turns this on during a certain scene only)
Alternative Look For Ciri - ON/OFF (user preference)
Additional Gwent Cards - ON

3. Reconfigure all the Options again (including key bindings, post processing, graphics etc.). Also note that there are now 2 new keys to bind: Use Item 3 and 4.

4. Run the game to verify that it loads up and plays correctly. Preferably use an existing save. You should get a pop up about Hearts of Stone expansion installed.

Reconfigure user.settings file

1. Navigate to \Documents\The Witcher 3 folder and edit user.settings file

2. Compare the file to the one that was backed up earlier on. If you use Notepad++ follow this procedure for easy comparison:

Open both files right click one of the file name-tab and select Move To Other View
Press Alt+D to switch to file compare view

3. Change the settings to match the ones from your old files, however note the following changes in 1.10 game version:

HasSeenEP1WelcomeMessage=true entry added to [Hidden] section
DlcEnabled_ep1=1 entry added to [DLC] section
AllowClothSimulationOnGpu=false entry added to [Visuals] section 
Under [Rendering] section:
  TextureStreamingHeadsDistanceLimit entry changed to TextureStreamingHeadsDistanceLimitSq and default ultra value changed
  TextureStreamingCharacterDistanceLimit entry changed to TextureStreamingCharacterDistanceLimitSq and default ultra value changed
  TextureStreamingDistanceLimit entry changed to TextureStreamingHeadsDistanceLimitSq
New [Gameplay/BoatCamera] section added with 
BoatLocalSpaceCamera=false entry

4. Save the file and exit

5. Change the file to be read only

6. Also Change input.settings to be read only

Reconfigure gameplay.ini file

1. Navigate to \The Witcher 3 Wild Hunt\bin\config\base directory

2. Edit gameplay.ini file

3. Change MotionSicknessFocusMode=false to MotionSicknessFocusMode=true

4. Save the file and exit

5. Set the file to Read Only (right-click the file, select Properties, place a tick in Read-Only box, select Apply and then OK).

Update Nexus Mod Manager

Prepare for the update

1. Copy the previously backed up Mods folder back to \The Witcher 3 Wild Hunt folder.

2. Run Nexus Mod Manager. Choose not to update.

3. Unistall all the mods.

4. Close the program.

5. Navigate to \The Witcher 3 Wild Hunt\Mods folder and delete all the remaining contents.

Update the application

1. Navigate to http://www.nexusmods.com/games/mods/modmanager/?

2. Download the latest version (0.60.14 at the time of writing this)

3. Run the installer

4. After the installation is complete run the program

5. Confirm the popups until The Witcher 3 Setup window is displayed

6. Leave the Install Info and Virtual Install paths at default. You can change Mod Directory path if you like.

7. Select Finish.

8. Select YES to remove the old cache files

9. Wait for the program to load up and then close it.

MOD CHANGES

Reinstall non-standard mods

Gwent Redone and Alternate Art

• Author: Sleemani
• Version: 1.1
• Installation: Download "Gwent Redone and Alternate Art v1.1" file. Follow these instructions:

Unpack the mod to the location of your choice
Navigate to that location and edit Config.ini file
Change InstallVersion = 1 to InstallVersion = 2
Save the file and exit
Run "GwentRedone.exe" installation program
Confirm the 2 pop ups
Navigate to "\The Witcher 3 Wild Hunt\content\patch0\bundles" directory and select "patch.bundle" file
Press Enter to exit the installer

Naked Ciri is Naked

• Author: HartXIII
• Version: 1.0
• Installation: Download "Naked Ciri is Naked v1.0" file. Follow these instructions:

Navigate to your game installation directory: \The Witcher 3 Wild Hunt\content\content0\bundles
Unzip and copy everything to the above directory
Run the "Install.bat" file
Press Enter to exit the installer 

Note THIS IS NOT A NUDE MOD.

This mod will make Ciri wear no bandages during the bath scene, which makes it more realistic. Note Ciri isn't actually naked, it's just her bandages gone. The model was already in game, but wasn't used.

Triss DLC appearance for masquerade only

• Author: Sarcen
• Version: v1
• Installation: Download "triss_dlc_dressonly.rar" file. Follow these instructions:

Download and install the "Alternative Look for Triss" DLC from GOG 
Backup "The Witcher 3 Wild Hunt\DLC\DLC6\content\bundles\blob.bundle" in case you want to revert
Extract "blob.bundle" to "The Witcher 3\DLC\DLC6\content\bundles\" and overwrite the existing one.

This mod makes Triss wear the dress from Alternate Look For Triss DLC content only during the masquerade ball, which makes perfect sense, rather than her wearing it all the time. She's supposed to be in hiding and this dress ain't very discreet...