User:Gargan/Benchmarking

From Step Mods | Change The Game

Methodology[edit | edit source]

My current method for benchmarking is as follows.

  1. Start logging with HWiNFO64
  2. Wait at least 15 seconds
  3. Start Skyrim
  4. Start logging with Fraps as soon as fps counter appears (F11 hotkey)
  5. Wait at least 15 seconds after the main menu appears
  6. Start a new game
  7. Stop Fraps logging a couple of seconds after the autosave (F11 hotkey again)
  8. Exit Skyrim
  9. Stop logging with HWiNFO64

This procedure allows me to gather all sensor data with HWiNFO and also gather frametimes from Fraps. I prefer using frametimes to calculate an instantaneous FPS instead of using the approximately average FPS that is logged with either HWiNFO or Fraps. This allows me to see stuttering that would otherwise be averaged out. Good information on the use of frametimes instead of FPS is here.

Computer Specifications[edit | edit source]

My current setup is as follows.

CPU Intel Core i7-4771
Motherboard MSI Z87-GD65 GAMING (MS-7845)
Memory G.Skill F3-1600C7D-16GTX (2x8GB)
GPU EVGA 04G-P4-2768-KR GeForce GTX 760 4GB
HDD Samsung SSD 840 EVO 1TB

Vanilla[edit | edit source]

I tried to get my install as close to vanilla as I could. The only mods that aren't installed using Mod Organizer, are SKSE and ENBoost. So I temporarily removed ENBoost and I start Skyrim directly. I was able to get five extremely similar benchmarks.

Mean Std. Dev.
GPU Temp 49.683 °C 5.528 °C
GPU Load 61.037 % 8.410 %
Dedicated Mem. 978.498 MiB 115.843 MiB
Dynamic Mem. 26.853 MiB 4.253 MiB
FPS 60.054 1.985

GPU Temperature[edit | edit source]

GPU Load[edit | edit source]

Dedicated Memory[edit | edit source]

Dynamic Memory[edit | edit source]

FPS[edit | edit source]