Guide:Wrye Bash

Template:Notice A simplified guide to using Wrye Bash to maintain a modded S.T.E.P. setup -- by z929669 & S.T.E.P. Team

Updated: 15:42:27 2 August 2012 (UTC)

GUIDE FORUM THREAD

---

Installing & Maintaining S.T.E.P Using Wrye Bash

Introduction

Pre-installation Setup

Using Wrye Bash

BAIN Installers

Ex: Package Restructure

Ex: Create BCF

BAIN - Installing Mods

Mod Management

Official Documentation

[edit]

Wrye Nomenclature

Wrye was a prominent TES (The Elder Scrolls) enthusiast, modder and developer that created Wrye Bash as a tool to help other modders deal with the idiosyncrasies of modding for Oblivion (TES4). Wrye also later created an implementation that he called Wrye ‘Mash’ for Morrowind (TES3). Wrye Smash is simply Wrye ‘Bash’ implemented for Skyrim (TES5), so it IS Wrye Bash. For the sake of brevity and consistency, this guide will henceforth refer to Wrye Bash as ‘WB,’ and its analogues will likewise be referred to as ‘WS’ and ‘WM’ for Wrye Smash and Wrye Mash, respectively.

Purpose of This Guide

This guide assumes that the reader has reviewed the most updated relevant documentation now packaged with the WB program. If that is not the case, the authors strongly encourage a review of that documentation. Understanding--in a basic sense--what WB does and why it is useful are important concepts providing a context necessary for the reader to maximize the benefit of using this guide with respect to a fresh install of the most current major STEP (Skyrim Total Enhancement Project) release. Additionally, the guide will be modified and updated to reflect ongoing changes in each forthcoming major release of STEP. The novice WB user will likely find substantial value in following the guide as an actual working example of several sound techniques for implementing WB; nevertheless, much of the material covered in the following pages will be best understood with a baseline level of experience that exceeds “null” by at least a small margin, please familiarize yourself with the program before getting started.

Background - Basic Modding Principles

As with all TES games, modding Skyrim--in the most raw sense--can be accomplished by simply placing compatible files within the Steam\SteamApps\common\skyrim\Data\ directory (henceforth, referred to as “Data directory”). These files usually come packaged as a “mod” in an archive that facilitates simple decompression into the Data directory. Due to the vast number of mods and their incredible variety, the task of manual extraction and installation is a tedious process with lots of potential for error. Furthermore, it is difficult to “undo” what has been done, since it is difficult to keep track of the source of each file as the number of mods and files in the Data directory increases.

One must take care to read each mod’s documentation to understand exactly what it does and how it does in in at least a very general sense. Why? Because it is important to create a customized Skyrim that suits the tastes of the individual modder. Strictly defined, two mods are compatible if they do not attempt to alter the same game variable. Likewise, two mods that affect the same game variable are strictly defined as incompatible, which is more often termed a conflict. Said variable could be a mesh or a texture as well as a plugin or INI file. Even a game setting affected by a plugin while also being altered by an INI setting or a configuration script represents a conflict. Under the strict definitions of mod compatibility and conflict, many mods are incompatible and thus, have conflicts.

Fortunately, this is usually not really a problem, because most of the time, a conflict is inherently resolved by one mod “winning;” that is, one mod overwrites or overrides the other. For example, two particular versions of a texture file could attempt to occupy the same logical space in the Data\textures directory, in which case the second texture to be written to that space during installation will naturally overwrite the first. This is called a resource conflict. On the other hand, if one of those texture copies resides in a compressed BSA while the other exists as a “loose file,” then neither will physically overwrite the other upon installation, but rather one will override the other in-game upon execution of Skyrim. This is called a data conflict (also referred to as a load-order conflict).

The STEP Solution

One can spend hundreds of hours just searching for mods before actually getting down to the business of installing them. As mods increase in number and complexity and mod creators produce more and more mods that alter game play, interface and settings, the probability of game-crashing conflicts increases. The STEP project takes care of the heavy lifting associated with sifting through thousands of mods and selecting the ones that significantly enhance and improve the vanilla experience without detracting from it with as little cost as possible in terms of performance. Users are able to follow TheCompiler’s detailed, step-by-STEP manual-installation instructions and be confident that all components have been individually tested by the community and the results verified. STEP also facilitates customization by providing details of changes affected by each mod so that the user can choose to omit or change the order of STEP’s’. This cuts down on a vast amount of time and headache dealing with sampling, testing, troubleshooting, etc.

Limitations of STEP

Regardless of the huge time savings, efficiency boost and piece of mind that STEP offers, it is still a large manual process with many, well … steps. It can therefore take awhile, and problems can and will occur for many users with increasing frequency as mod numbers and complexity increase, so STEP will only go so far to reduce the job of maintaining a viable setup with each new mod or mod update. In order to allow better scalability of STEP as it evolves, it is necessary to simplify and condense the procedure into more manageable components. Mod organizers in general help in this regard by keeping track of files installed and package installation order. In particular WB enables the most configurable interface for mod management, and is thus the recommended choice for installing, configuring and maintaining the STEP setup with each new alteration in the mod configuration.

[edit]

WB is not just simply a mod organizer but much, much more. Like other mod organizers, WB keeps track of mod packages as well as file sources and installation priority; however, WB goes far beyond this, as will be demonstrated throughout the rest of the guide.

Set Up Skyrim & Supporting Software

A much more comprehensive and in depth guide is available Skyrim Installation Guide.

Establish a Clean Skyrim Install

Figure 1: These are the only files that should appear in skyrim\.

A clean Skyrim install establishes a baseline from which to begin the STEP installation procedure. The simplest way to ensure a clean Skyrim install is to delete all loose files (not directories) from the skyrim\ directory (parent to Data directory), followed by cleaning out all files and directories from the Data directory (Figure 1).

Once complete, open the Steam Libraries view, right click on Skyrim and select [Properties]. Click on the [LOCAL FILES] tab, then click on [VERIFY INTEGRITY OF GAME CACHE...]. This will restore any missing files whilst avoiding the time-consuming and redundant download of the large files listed above. If ther is any uncertainty, uninstall and then reinstall Skyrim from scratch to this point.

Install File-Compression Software

Almost any file-compression software can be used to view the contents of packages. 7-zip is favored by the authors, because it can produce dramatically smaller files than the other formats and it recognizes virtually every compression format. It's also free, open-source, and supports most of the other common formats.

Install & Configure Wrye Bash

Install

1. Uninstall the previous installation of Standalone Wrye Bash using the un-installer located among the Start Menu > Programs > Wrye Bash shortcuts. If an existing Python installation exists, don't bother removing anything, as the new installer will remove any outdated files/folders in the last step if you choose that option in the last step of installation. However, it may be a good idea to back up any skyrim/Data/INI Tweaks or skyrim/Mopy/bash.ini if present.
2. Download the Wrye Bash 299 (or current) installer from the Nexus.
3. Tick [Skyrim] and [Standalone]. Installing the Python version is also valid, but that methodology will not be supported in future versions of THIS guide.
4. Allow the installation of any dependencies if prompted.

If the installer is having trouble finding Skyrim ...

• Exit the installer, restart Steam, and run Skyrim from Steam. Doing this will create the necessary registry entries required for WB to find the installation directory.

5. Delete the "Oblivion" directories from skyrim\Data\INI Tweaks and skyrim\Mopy\Bash Patches.
6. Delete "Bashed Patch, Oblivion.esp" from skyrim\Mopy\templates.

Configure

If no previous backup of bash.ini is available, copy and then rename "bash_default.ini" to "bash.ini," and place this alongside the former. The INI defines many useful things including where WB looks for installers. Edit bash.ini, and replace the "\Oblivion Mods" directory references with "\Skyrim Mods" and update any other paths or settings as necessary. Many users prefer to keep Skyrim Mods\ on a different harddrive. Do not try to change the "\Bash Installers" directory reference, as that is hardcoded, and Bash will create it inside Skyrim Mods\.

The Python version allows execution of a debug batch file to ensure that everything is configured properly, all errors will be logged to "BashBugDump.log". Python-version users will also need to create a shortcut to "Wrye Bash Launcher.pyw" and move to a convenient location (like the Desktop or Quick Launch bar).

Install BOSS

Get BOSS from the Nexus and install according the the instructions provided. You will be launching BOSS from Wrye Bash’s interface going forward. Template:Note

Install SKSE & Script Dragon

1. Download the current release build of SKSE.
2. Drop all loose files into skyrim\ (but leave the ‘'src\'’ directory behind)
3. Create a text file using Notepad or any other simple text editor and paste the following two lines:

[Interface]

EnableContainerCategorization=1

1. Under the Data directory, create a folder called ‘'SKSE\'’, save the file as ‘skse.ini’ and drop it into skyrim\Data\SKSE
2. Download Script Dragon from the Nexus.
3. From the archive, drop bin\dinput8.dll and bin\ScriptDragon.dll into the skyrim\ directory.

[edit]

WB's two main uses are found under the Installers Tab where resides "BAIN" (BAsh INstaller) and the Mods Tab where mods can be managed using many various tools including the "Bashed Patch". The Bashed Patch takes elements from various mods and puts them into one plugin, which resolves many mod conflicts. Think of mods as a series of transparent films containing layers of a complex graphic. When laid atop one another, each layer adds to the final composite. Redundancies and conflicting components are effectively merged into an overall mean that is a composite mod called the Bashed Patch. This allows otherwise incompatible plugins to coexist, and many mods are completely merged into the composite, thus effectively circumventing the 255 plugin limit, since byte references to completely mergeable mods are no longer required. BOSS is still required to maintain load order, and it can be launched BOSS directly from WB.

BAIN informs the user of potential resource conflicts prior to installation and provides details concerning the conflicting resources, mods involved and the order numbers of the involved mods. This allows one to customize mod installation order to achieve the desired result. Perhaps even more importantly, BAIN keeps track of the mod-specific resource hierarchy, allowing simple installation and uninstallation of any combination of mod packages at any point in the installation hierarchy. This means that if a mod installed after a previously-installed conflicting mod is removed, then the assets from the overwritten mod will be re-installed automatically by default (this is the "Anneal" functionality of BAIN).

Launch Wrye Bash for the First Time

Figure 2: Wrye Bash will open to the Mods Tab by default.

Launch Wrye Bash using the Start Menu shortcut, and WB will open to the Mods Tab, which is where plugins (ESMs & ESPs) are managed (Figure 2). Upon launch, WB creates Skyrim Mods\ beside skyrim\. This is the directory under which WB will look for mod packages among other things; therefore, mod packages should be moved or downloaded directly to Steam\SteamApps\common\Skyrim Mods\Bash Installers\. Template:Note

Click the "Installers" tab, this might invoke a pop-up warning, if it does click on ‘Yes’ and it should load very quickly, as there is nothing yet in the package repository. Adding a new package to BAIN is as easy as dropping a zip file into the bash installers directory. A full crc scan of the package repository (Bash Installers\) is initiated every time the installers tab is selected and any new mods found will be appended in alphabetical order to the package list. It should be noted that WB recognizes the contents of both extracted folders (called projects) and archives (called packages); however, it is strongly recommended that installers be kept in archive format as a standard practice, as this is not only a more efficient use of space, but for some reason, it takes WB significantly longer to scan a given project than it does its corresponding package.

[edit]

Obtain the Mods

1. Open a web browser and navigate to the STEP site on the Nexus, and download the latest STEP guide (v2.0.1a [Preview #3] at the time of this writing).
2. Carefully follow TheCompiler’s (creator of STEP) instructions through STEP 2, Sec. A (Script Utilities).
3. Download mod groups 1 through 6 as listed in STEP 2, Sec. B1 (Textures\Graphics) and place each package into your Bash Installers\ directory.
4. Click on the WB program title bar or task bar icon to bring it into focus. This will prompt a refresh of the Installers as the newly-added packages are scanned by BAIN, so allow a few minutes for this process to complete.
5. Once BAIN finishes there are a couple of different ways to organize the installers such that the STEP install order is honored; however, it is recommended that packages be renamed according to the sections to which they belong and the numeric order of appearance in the STEP Guide. This simplifies the task of properly ordering packages prior to installation (a VERY important requisite).

Once WB is set up correctly and the mod packages of interest are deposited into Bash Installers\, it is possible to evaluate which packages are or are not properly recognized by BAIN in order to proceed with installation. A few packages will need to be restructured in order to be properly recognized and installed by BAIN.

Package Structure & Interpretation

Figure 3: Introduction to BAIN. (L to R) Package Details, Sub-Packages/Plugins, Comments

The installers tab contains the package-management interface. Package management is a VERY important aspect of WB, and standards of Wrye BAsh INstaller (aka BAIN package or archive) structure represent the foundation of effectively using BAIN. Unfortunately, not all mod authors pack their mods in a BAIN-ready format, so it is important to understand how to convert to the proper structure. The good news is that BAIN has some flexibility, and usually can translate archives correctly. Packages preceded by a red (simple package), white (complex package) or gray (unrecognized) box are NOT installed (installed packages will have a plus [+] symbol inside the box). Before proceeding further, all packages must be made recognizeable to BAIN (i.e., gray boxes and text must be eliminated). The following examples illustrate BAIN package interpretation and allude to some effective packing methods.

• Clicking on an archive will bring up details about the package in the upper right frame (red outline), as well as any sub-packages or plugins if present just below that (blue outline), followed by a convenient area to type in some comments about the package (green outline).

• A closer look at the package details of example packages 1-4 depicted in the package list of Figure 3 reveals further detail:

• Plugin filters and sub-packages can be seen just beneath the package details viewer (see blue outline in Figure 3). Any BAIN-ready package selected that contains an ESM or ESP will list them under [Esp/m Filter]. Complex BAIN packages will also list the folder names alphanumerically under [Sup-Packages]. Details in Figure 6 reference the Ex 1 and Ex 5 as in Figures 4 & 5.

Figure 4: Package Details.
Ex 1. Standard files & folders. All files and directory structure are revealed. WB recognises several typical Skyrim file types and folder names as well as folders installed by WB itself.	Ex 2. Standard files & folders with extra, non-standard folders. There is an extra directory in this archive that is not recognized by WB, because it does not follow a standard naming convention.	Ex 2. Standard files & folders with extra, non-standard folders (revealed). The files that were invisible to WB are detected if [Has Extra Directories] is ticked in the context menu (right click any package to bring up the context menu).

Figure 5: More Package Details.
Ex 3. Standard files & folders (2 levels). This reveals the exact same contents ad in Ex 1 previously; however, the directory structure includes another level represented by the Data directory. Many mods are packed this way, and WB understands them just fine and will install the package accordingly.	Ex 4. Standard files & folders (3 levels). This is exactly the same as Ex 3, but the Data directory is now beneath yet another parent directory. Unfortunately, WB stops looking for anything more than 2 folders deep at this time. Many mods come packed this way, and were not created by modders that are thoughtful of BAIN. This will need to be extracted and repact according to Ex 1 or Ex 3.	Ex 5. Two folders containing standard files & folders. All preceding examples have been of simple package structure. This is an example of a complex package structure. The contents of 00 Core are exactly the the same as in Ex 4, but there the ‘01 Optional’ folder containing options (note the file names in the example). Complex package structures allow an additional level of organization.

Figure 6: Complex BAIN packages, Sub-Packages and Plugins.

Ex 1. Standard files & folders. This is a simple BAIN archive containing a single plugin, which (unlike other files in the archive) must be selected prior to install.

Ex 5. Two folders containing standard files & folders. This is a complex BAIN archive; therefore, it contains two directories as listed in the [Sub-Packages] area, each of which contains recognized files and/or folders as listed in the package details above. As is indicated, selecting the 00 Core sub-package will direct BAIN to install those listed. Selecting also the 01 Options sub-package will add the highlighted optional files. Again, unlike other file types, plugins must be selected to flag specifically for install.

[edit]

BAIN-Repack Unrecognized Packages

1. Begin by navigating to Bash Installers\ and unpacking unrecognized packages into projects of same name in same location. Do the same for any packages that need modification according to TheCompiler’s advice.
2. Within each project, find the ReadMe and READ IT if available. If it is not, then navigate to the mod’s host site on the Nexus and scan the description. If there is still ambiguity, post a comment to the mod author asking that a ReadMe be provided (this should be a mandatory requirement!).
3. Determine which files\folders are of interest, and restructure the projects with reference to Figures 4 & 5 above.
1. Even though BAIN will recognize up to two directory levels, it is best-practice to structure the archive with a single directory level as if the archive itself were the Data directory.
2. If there are no conflicting options within the package, then it should be packed as simple. Otherwise, pack as complex, and label the sub-package directories such that the default precedes the optional version(s).
4. Once the new directory restructure of the project is complete, re-pack the mod into an archive using the same name as the project, but with ‘BAIN’ added to the end of the file name, but BEFORE the numeric package ID#. DO NOT DELETE the original package.

SIDEBAR: BAIN package restructure

EXAMPLE - Simple-package repack: 1-(CORE!)Accingite Vos - HQ Shields-225-1. Rearrange the project (blue outline) into a ‘simple’ structure that BAIN will recognize (green outline). In this case, ...

• the contents of 1-(CORE!)Accingite Vos - HQ Shields-225-1\Accingite Vos\Data\ should be moved up two directories to 1-(CORE!)Accingite Vos - HQ Shields-225-1\ (see Figure 9).
• Delete the now-empty Accingite Vos & Data folders.
• Re-pack as, for example, 1-(CORE!)Accingite Vos - HQ Shields_BAIN-225-1.7z.
• Once finished, move the new BAIN archive back up to Bash Installers\ and delete the source project (but DO NOT DELETE the original unrecognized source package).

---

EXAMPLE - Complex-package repack: 3-(CORE!-FPS!)Skyrim Realistic Overhaul_1024-5400-1 This mod represents a good opportunity to produce a proper BAIN complex package using 3 separate input packages (low-res option, hi-res option, update). The desired result can be achieved in several ways, and the following is arguably the simplest. Starting with:

• Begin by renaming the top sub-folder of the low-res project from “Skyrim Update Overhaul 1024" to simply "1024 res", and rename the top sub-folder of the hi-res project from "Skyrim Update Overhaul" to "2048 res".

• Copy "2048 res" from the hi-res project into the low-res project along side "1024 res", and delete the hi-res project.

• Copy the "1024 res" and "2048 res" folders from the update into what used to be the low-res project and overwrite all when prompted.

• Apply TheCompiler’s advice, by creating two new directories called "1024 res (not recommended)" & "2048 res (not recommended)"

• Copy the textures folder from "1024 res" to "1024 res (not recommended)", and copy the textures folder from "2048 res" to "2048 res (not recommended)". Delete the update project.
• Finally, remove the textures\landscape\roads\ files indicated by TheCompiler from "1024 res" & "2048 res" and remove EVERYTHING BUT these files from “1024 res (not recommended)" & "2048 res (not recommended)" (i.e., the inverse).
• Optionally, add numeric prefixes to the sub-project names in compliance with standards for complex BAIN packages. This delineates conflicts.
• Optionally, it is recommended that any ReadMe files present be named accordingly and placed into a folder named "Docs" created beside each of the "Textures" folders within each sub-project.

• The result is a complex BAIN package for SRO that includes all options for maximum customization. Archive the project into an aptly-named package and move to Bash Installers\.
• Delete the remaining project, but DO NOT DELETE the original three SRO packages!

Repeat this process for all remaining projects that need BAIN re-packing, TheCompiler’s advice modifications or whatever makes sense beyond that. This process is tedious, but it forces the mod user to become intimately familiar with a given mod, which will be useful later on.

[edit]

BAIN "Package" Conversion Files

BCFs (BAIN Conversion Files) are very useful compressed instruction scripts that tell BAIN how to create BAIN-ready installers from BAIN-incompatible packages. Given that both source file(s) and converted BAIN version(s) exists, it is quite simple to create a BCF to make the task fast and easy for other downstream users. Template:Note

Figure 9: Selecting source files for creating a BCF.

• In BAIN, select the file or files that were used as the source(s) of the resulting BAIN file, and right click to bring up the context menu (see Figure 9). Select [Conversions] > [Create].
• Select the resulting BAIN package when prompted. Using the SRO example described previously ...
• Select “OK” to the following pop-ups.

Figure 10: Create BCF dialogue (Pt 1).

Figure 11: Create BCF dialogue (Pt 2).

• The results will be summarized, and the new BCF will be created in Bash Installers/Converters/.
• To apply a converter, simply select and right click all of the input files, select [Conversions] > [Apply] and choose the BCF of interest. Given that the source package contents (file CRCs and structure) are as expected by the BCF, the BAIN will be converted automatically, with the defined file name. This process is agnostic of the input file names per se.
• Once a BCF is created, there is less value to retaining the original non-BAIN source packages. It is recommended that these be separated from the actual installers by selecting each source package, right click, select [Move To], and enter in a -1. This will move them to the bottom of the installation list when packages are later sorted by [Order]. … More on this later in the guide ...

[edit]

Package Order

Figure 7: BAIN column headers.

Like all tabs in WB, the installers tab has several header elements that can be right clicked to pull up a context menu of useful commands. Left clicking on a given header label will sort the list by that column (see Figure 7).

Once the files have been downloaded, renamed and sorted by package, BAIN should resemble Figure 8.

File:Figure8 BAINSTEP2B2Mods.jpg

Figure 8: STEP-reorganized BAINs sorted by package name.

The [Order] column is of particular interest, as this column defines the installation hierarchy. Packages assigned to lower numbers are installed first; thus, files from lower-numbered packages will be overwritten by those from higher numbered packages where there is conflict. Likewise, sub-packages work the same way: those with lower numeric prefixes will appear in the list first and thus, will be installed first, and conflicting files will be overwritten by those with higher numbers (sub-packages are sorted alphanumerically). This guide will illustrate in detail how to set up STEP mods by focusing only on the initial texture mods. The same process may be used to set up all subsequent mods.

Set the Installation Order

Because installation order is critical to get the results expected in game, the packages must be ordered properly according to install order such that the desired assets overwrite their conflicting assets. This is done by sorting BAIN installers by the [Order] field. BAIN will handle every aspect of the hierarchy according to the preset install order, regardless of what packages are installed, saving the user a huge management headache and allowing the user to easily install/uninstall alternate conflicting assets.

File:Figure12 MoveTo2.jpg

Figure 12: Adjusting installation order of single mods or mod groups.

 

1. Click on the [Packages] column header to sort by package name. This will organize the mods according to the STEP Guide recommendations.
2. Select group '1' packages, right click, and select [Move To]. Then enter '0' if it is not already entered and select [OK] (see Figure 12). The package list will not change, since BAIN is still set to order by package NAME; however, the order numbers will change.
3. Select the group '2' packages, and repeat the previous step, but this time, enter into the [Move To] dialogue the number equal to 1 + the highest group '1' [Order] number. Repeat this process for all 6 groups.
4. Left click on the [Order] header to sort by package order. The new sort should cause a slight change in the package list order, but only within groups. Check to be certain that packages are now both ordered by increasing [Order] number as well as that the package name groups are also in order. If they are not, simply right click on the misbehaving package, and [Move To] a position within its respective group within that group's [Order] range.
5. Once the installation order has been correctly set, the package list--when sorted on the [Order] column--should resemble Figure 13.

File:Figure13 MoveTo3.jpg

Figure 13: Final STEP Textures/Graphics load order.

Package Installation

At this point, the mod packages are ready to install. Begin by confirming that no unexpected or undesireable conflicts exist. Before doing this, it will be useful to 'hide' the original installers that were previously converted to BAIN format. Doing so prevents these packages from being included in the conflicts viewer.

• Select all of the obsolete packages, which should now be listed at the very end of the BAIN package list after the "==Last==" marker.
• Right click on one of the selected packages and select [Hide] from the context menu (confirm when prompted; see Figure 14).

File:Figure14 Hide.jpg

Figure 14: Hiding installers.

• Select “4-(CORE!-FPS)Tobes Highres Textures_1_2_1024_BAIN.7z” installer, and examine the package details in the upper right frame of the BAIN window.
  • The [General] tab gives an overview of the files recognized in the package as well as some useful statistics.
  • The [Matched] tab should be empty, and will only list files with paths if there is a currently-installed file in the Data directory identical to any of the files that BAIN recognizes in the selected package.
  • The [Missing] tab should list all files in the package, since it is the exact reciprocal of the [Matched] tab.
  • The [Conflicts] tab is of special interest, because it will reveal actual conflicts OR potential conflicts according to a setting in BAIN’s main context menu. If [Show Inactive Conflicts] is unchecked, the [Conflicts] tab should be empty, so ensure that this setting is ticked to reveal potential conflicts (Figure 15), as no packages have been installed to this point.

File:Figure15 ShowConflicts.jpg

Figure 15: Show inactive conflicts

• According to TheCompiler, "Tobes Highres Textures" overwrites "HD Misc", "Skyrim HD" and "High Quality Food and Ingredients", so check to be certain that this is the case. Files and package [Order] numbers that will be overwritten will be listed first under the "=Lower===" heading, and those that will overwrite the currently-selected mod will be listed under the "=Higher===" heading (Figure 16). Verify the accuracy of TheCompiler’s claims.

File:Figure16 Conflicts.jpg

Figure 16: View conflicts

• • [Underridden] and [Dirty] tabs list misbehaving and problematic files, respectively and should always be empty.
  • The [Skipped] tab lists any files/folders that are not recognized by BAIN as "install-able". Often, this can be rectified by ticking [Has Extra Directories] in BAIN's main context menu. If not, the file will need to be restructured within the installer if it should be installed.
  • Check to be certain that any packages that have a white box preceding the package name have sub-packages selected as indicated in the middle frame on the right side of BAIN. Likewise, be certain that all necessary ESP/M Filters are also selected.
  • Once all packages have been verified and all necessary or optional adjustments made to the instllers, ALL packages may be selected at once and installed by right clicking one of the selected packages and clicking on [Install]. This can also by done for each individual package and in any order, since the hierarchy has already been defined. Depending on computer hardware, this process could take only a minute or more than 10 minutes.
  • Uninstallation is done in the same manner as installation, and all of the same rules apply.
  • Once installed, the boxes preceding package names will be either yellow or green, and each will have a '+' symbol, which indicates that the package is installed. Yellow means that the package has some filed installed, but others have been overridden by higher-order packages. Green means that all files of the package are installed without any overrides (Figure 17).

File:Figure17 BAINInstalled.jpg

Figure 17: Installed mods & Overwrites

Infrequently, packages that are highlighted in yellow or orange have not been installed according to the defined heirarchy. This can easily be corrected by right clicking on the package and selecting [Install Missing]. Afterwards, right click the package again and click [Anneal] or [Anneal All] to tell BAIN to consider all packages in the install list. The [Anneal] function simply tells BAIN to refresh its assessment of the defined install hierarchy and reapply those rules to correct any unintended conflicts. It never hurts to use this function frequently, and [Auto Anneal] should always be ticked in BAIN’s main context menu to honor the install hierarchy.

Again, use the approach described thus far for setting up BAIN installers and installing the rest of STEP.

[edit]

Using the WB Mods Tab

Setting the load order of the plugins

Now that the installation is finished and verifiable, move to the Mods tab to begin ordering your plugins according to the latest BOSS masterlist. No need to tick the plugins via the 'Data Files' menu via the Skyrim Launcher. WB will take care of that right here, simply tick every box, then click on the BOSS icon at the bottom left of the WB window. This will execute boss and potentially give you some recommendations or warnings and perhaps suggestions for 'Bash Tags' or that a mod can be marked as mergeable. For now, I will stop right here, as the complexities of plugin management are not relevant at this stage of STEP. The same is true for INI Edits and Saves tabs. I will cover those once I get feedback as to the format and usefulness of what I have discussed thus far.Template:Note

INI Tweaks

MadWizard25's INI Tweak collection

Happy gaming. (Leave a comment if you have questions or suggestions or PM me {z929669} on the Nexus).

[edit]

The following documents are updates to the original WB documentation and will be updated with each official WB release moving forward. These guides will also support Skyrim users. All maintained by WrinklyNinja and the OblivionWorks Developers. Current and future releases of WB will include this documentation.