SkyrimLE:ModList/Polish/2.2.1

From Step Mods | Change The Game
Revision as of 20:00, November 18, 2021 by Z929669 (talk | contribs) (Text replacement - "SkyrimLE" to "{{NAMESPACE}}")
Warning-Logo.png

WARNING

This guide is out of date and is NOT supported! It may contain information that is incorrect or not in line with the current state of the game.
Go to the latest supported SkyrimLE Guide.

O projekcie STEP[edit | edit source]

Tytulem wstepu

STEP jest wyczerpujacym i szeroko zakrojonym poradnikiem, który ma na celu uzupelnienie gry TES V: Skyrim o najlepsze modyfikacje (zwane potocznie modami) oraz optymalizacje ustawien. Glównym zalozeniem projektu jest zachowanie wiernosci oryginalnej zawartosci Skyrima, przy jednoczesnym wzbogaceniu wrazen wizualnych i dzwiekowych oraz poprawieniu bledów w mechanice gry.

Autorem projektu jest TheCompiler, calosc jest jednak praca zbiorowa, powstala przy udziale spolecznosci modderskiej, ochotników posiadajacych wiedze techniczna oraz administratorów projektu. Celem STEP-a jest zapewnienie sprawdzonych i przetestowanych metod, które pozwola na instalacje i utrzymanie wzbogaconego o modyfikacje Skyrima. W poradniku przedstawiamy w sposób szczególowy, jak zrobic z oryginalnej instalacji wzbogacony „szablon” czy tez „podstawke” gry, która pózniej mozna wykorzystac do instalacji kolejnych modów. Niedoswiadczonym uzytkownikom zalecamy dokladne stosowanie sie do instrukcji "krok-po-kroku" zawartych w poradniku, natomiast bardziej zaawansowani gracze moga uzyc STEP-a jako ogólnych wytycznych do modowania swojej gry.

W celu zebrania informacji odpowiedniej jakosci (czyli takich, które jak najlepiej spelnia oczekiwania uzytkowników), zespól projektu STEP wspólpracuje ze spolecznoscia modderów poprzez szczególowe recenzje, opinie i sugestie wymieniane i omawiane wspólnie na Forum Spolecznosci STEP. Na forum obowiazuje regulamin, z którym nalezy sie zapoznac (cala strona funkcjonuje wylacznie w jezyku angielskim). Po rejestracji mozna sie juz cieszyc pelnym dostepem do wszelkich udostepnianych informacji, a w razie problemów - liczyc na chetna do pomocy ekipe. W celu porównania jak wyglada Skyrim przed i po instalacji STEP-a, mozecie sprawdzic zrzuty ekranu na stronie Nexus, ale tak naprawde jedyny sprawdzony sposób na doswiadczenie, czym naprawde jest STEP, to wypróbowanie go!

Ucieszymy sie z kazdego wsparcia finansowego Projektu STEP - datki przeznaczane sa na utrzymanie serwera, domeny i zarzadzanie projektem.


Wytyczne projektu STEP[edit | edit source]

Zobowiazania

Podstawa projektu jest wzbogacenie oryginalnej wersji gry Skyrim na komputery PC poprzez...

  • zamiane tekstur na lepsze, przy minimalnej utracie wydajnosci gry
  • konsekwentny i logiczny dobór modyfikacji graficznych i dzwiekowych w celu poprawienia klimatu rozgrywki
  • poprawienie komfortu UI i systemu menu
  • wybór modyfikacji naprawiajacych blednie funkcjonujace aspekty mechaniki gry

Projekt NIE dotyczy modyfikacji, które...

  • wprowadzaja zmiany sprzeczne z zalozeniami oryginalnej wersji gry oraz uniwersum The Elder Scrolls
  • wprowadzaja do gry erotyke oraz podmieniaja modele kobiecych postaci
  • podmieniaja muzyke z oryginalnego produktu
  • diametralnie inegruja w sposób rozgrywki

STEP w wersjach Wydajnosciowej, Podstawowej i Ekstremalnej[edit | edit source]

Projekt STEP oferuje 3 rózne wersje. Instalacja modów oznaczonych jako "Core" (zielony pasek przy nazwie moda) jest niezbedne i wymagana do poprawnego funkcjonowania wszystkich trzech wersji STEP. Pozostale mody nie sa niezbedne, aczkolwiek Ekipa projektu STEP goraco poleca ich instalacje. Poszczególne wersje STEP zostaly stworzone z mysla o wydajnosci, w zaleznosci od mozliwosci komputera gracza:

Wersja Wydajnosciowa: Jedynie mody oznaczone jako "Core". Wybór opcji wydajnosciowej dla wszystkich modów.
Czyli: "Z litosci nie bede katowal procesora i karty graficznej, ale musze miec STEP!"
Wersja Podstawowa: Mody oznaczone jako "Core" oraz dowolne mody dodatkowe. Wybór opcji wydajnosciowej lub sredniej jakosci, jesli to tylko mozliwe.
Czyli: "Mój komputer daje rade, ale nie zniose, jesli gra bedzie sie choc troche zacinac!"
Wersja Ekstremalna: Wszystkie mody oznaczone jako "Core" oraz wszystkie mody dodatkowe. Wybór opcji oferujacych najwyzsza jakosc, jesli to mozliwe.
Czyli: "Posiadam superkomputer!"


KROK 1[edit | edit source]

Konfiguracja przed instalacja

Wymagania[edit | edit source]

  • Oficjalny Patch v1.8
  • Cierpliwosc i szczególowe wykonywanie instrukcji krok-po-kroku
Info-Logo.png
NOTE:
Oficjlane dodatki do gry (DLC) NIE SA wymagane do instalacji STEP, ale mozna je miec zainstalowane.

System[edit | edit source]

Poradnik STEP zostal napisany z mysla o komputerach posiadajacyh ponizsze (lub porównywalne) parametry:

  • Windows 7
  • Intel i5/i7 quad core
  • 4+ GB pamieci RAM
  • Karta graficzne 1+ GB VRAM (DDR5)
  • Rozdzielczosc ekranu: 1680x1050
Info-Logo.png
NOTE:
Uzytkownicy posiadajace slabsze komputery powinni zainstalowac STEP w wersji Wydajnosciowej. Wiecej informacji tutaj.

1.A. Instalacja platformy Steam oraz Skyrima[edit | edit source]

Niniejszy poradnik zaklada, ze uzytkownik zainstalowal aplikacje Steam zgodnie z Poradnikiem Instalacji Skyrima (chwilowo dostepny jedynie w wersji angielskiej). Zalecamy poswiecic troche czasu na poprawna instalacje i konfiguracje zarówno platfortmy Steam jak i samego Skyrima, wedlug instrukcji zawartych w poradniku.

UWAGA! Waznym jest, zeby dalsza instalacje STEP przeprowadzac na SWIEZYM, NOWO ZAINSTALOWANYM SKYRIMIE! Ewentualnie mozna spróbowac przywrócic Skyrima do podstawowej, swiezej wersji wedlug tego poradnika (w jez. angielskim).

UWAGA! Poradnik STEP przeznaczony jest do gry w wersji angielskiej. Autor tego tlumaczenia posiada gre wlasnie w takiej wersji i nie gwarantuje, ze Projekt STEP bedzie w pelni funkcjonalny w polskiej wersji gry. Wiele z modów zawartych w poradniku podmienia opisy przedmiotów, ras itp. Autor tlumaczenia nie wie, jaki wplyw na polska wersje gry beda mialy mody tego typu i nie bierze odpowiedzialnosci za wszelkie ewentualne problemy, które wynikna z tego tytulu.

1.B. Opcje Menu Startowego Skyrima[edit | edit source]

1.B.1. Ustawienia Menu Startowego[edit | edit source]

  1. Uruchom Skyrima przez aplikacje Steam i kliknij na [Options (Opcje)]. Spowoduje to utworzenie plików konfiguracyjnych (tzw. pliki INI) i automatyczne ustawienie opcji gry zgodnie z wykrytym sprzetem. Powstana równiez wpisy w Rejestrze Windowsa, które beda niezbedne do dzialania pomocniczych programów, niezbednych w dalszej czesci poradnika.
  2. Kliknij przycik [Ultra].
  3. Antialiasing ustaw na 4. Róznica miedzy 4 a 8 próbkami jest na bardzo subtelna i niewarta utraty wydajnosci, która powoduje (zgodnie z Poradnikiem Tweakguides). W celu ostatecznej poprawy wydajnosci obniz wartosc z 4 do 2. UWAGA: Jesli uzywasz SMAA, ustaw Antialiasing na ZERO.
  4. Anisotropic Filtering (Filtrowanie Anizotropowe) ustaw na 16 (ustawienie na 8 nieznacznie poprawi wydajnosc gry).
  5. Kliknij przycisk[Advanced (Zaawansowane)] i upewnij sie, ze opcja FXAA jest ODZNACZONA. FXAA pogarsza efekt Filtrowania Anizotropowego, jak równiez ogólna jakosc tekstur. Oferuje co prawda znaczacy wzrost wydajnosc w stosunku to Antyaliasingu, ale widocznie zmniejsza jakosc. UWAGA: SMAA jest nieco lepsza alternatywa dla FXAA.
    • Rozwaz ustawienie jakosci cieniowania na 'High' (Wysokie) zamiast na 'Ultra', jesli masz karte graficzna z mniej niz 1 GB VRAM (STEP w wersji Wydajnosciowej) lub pozostaw ustawienie 'Ultra' dla wersji Ekstremanlen STEP.
    • Under [View Distance], make sure Object Detail Fade is UN-checked and adjust grass to 100% with all other settings around 50%.NOTE: High-end systems can handle max view distances just fine.
  6. Wyjdz z menu opcji i kliknij "Play". Spowoduje to utworzenie niezbednego pliku konfiguracyjnego i wpisów w rejestrze Windows, wymaganych przez niektóre z aplikacji opisanych w dalszej czesci poradnika. Wbrew powszechnemu mniemaniu uruchomienie gry nie jest wymagane do utworzenia plików INI.

1.C. Ustawienia ekranu i karty graficznej.[edit | edit source]

1.C.1. Posiadacze kart Nvidia[edit | edit source]

  1. Pobierz i zainstaluj najnowsze sterowniki (wersje beta, jesli jest dostepna).
  2. Pobierz program Nvidia Inspector.
  3. Przeczytaj Wiki Poradnik Nvidia Inspector Wiki (tylko w jez. angielskim).

1.C.2. Posiadacze kart ATI[edit | edit source]

  1. Pobierz i zainstaluj najnowsze sterowniki (wersje beta, jesli jest dostepna).
  2. Uruchom Catalyst Control Center i kliknij przycisk [Preferences] w prawym górnym rogu. Wybierz Advanced View.
  3. Po lewej stronie, w sekcji Gaming wybierz 3D Application Settings.
    • Ustaw anti-aliasing i anisotropic filtering tak samo jak w opcjach Skyrima powyzej.
    • Ustaw [Tessellation] na AMD Optimized
    • Ustaw [Catalyst A.I.] na najwyzsze ustawienia tekstur i zaznacz Enable Surface Format Optimization
    • Ustaw [Wait for vertical refresh] na Quality
    • Ustaw [Anti-Aliasing Mode] na Multi-sample AA
    • Zaznacz opcje Triple buffering w [OpenGL Settings]

1.C.3. Ekran[edit | edit source]

Skonfiguruj ustawienia ekranu monitora uzywajac narzedzia Windowsa.

  • Najpierw uzyj jednego z wbudpwanych ustawen konfiguracyjnych
  • Nastepnie powtórz proces kalibracji przy uzyciu narzedzi dostepnych z poziomu sterownika karty graficznej
  • Za kazdem uruchom wszystkie opje kalibrowania monitora, zwracajac szczególna uwage na ustawienia gamma, jasnosci i kontrastu.

1.D. Benchmark Wydajnosci[edit | edit source]

Ponizsza procedura jest bardzo wazna, jesli chodzi o ustalenie podstawowej wydajnosci systemu, jak równiez bardzo pomocna dla ekipy projektu STEP w ustaleniu rozrzutu wydajnosci wsród uzytkowników. Dane te pozwalaja nam na dokladniejsze ustalenie wymagan dla przyszlych wersji STEP. Wklad uzytkowników w benchmarki jest bardzo ceniony i ma duza wage dla jakosci projektu!

Nastepujace kroki powinny byc jak dotad zakonczone:

  • "Czysta" instalacja aplikacji STEAM oraz Skyrima,
  • Podstawowa konfiguracja opcji gry, wygerenowane pliki INI,
  • Konfiguracja karty graficznej oraz kalibracja monitora.

Jest to idealny wrecz moment na zebranie podstawowych danych dotyczacych wydajnosci, jesli chodzi o Skyrima. Wszelkie kolejne zmiany konfiguracyjne beda wprowadzane recznie. Zmiany te moga miec znaczacy wplyw na wydajnosc naszego systemu. Ten pierwszy, podstawowy benchmark pozwoli zebrac cenne informacje na temat ustawien i srodowiska gry. Najlepszy czas na wykrycie wszelkich problemów ze sterownikami, niekompatybilnych aplikacji, problemów ze sprzetem oraz innych defektów jest teraz, kiedy gra jest jeszcze niezmodowana, poniewaz tego typu problemy beda znacznie trudniejsze do zidentyfikowania w pózniejszej fazie, kiedy zaczniemy instalowac nasze modyfikacje. Zaleca sie, aby uzytkownik wykonal ponizsze kroki za kazdym razem, kiedy zmieniane sa pliki konfiguracyjne INI oraz po ukonczeniu instalacji modów z kazdej sekcji poradnika STEP.

Ponizsza ikona pojawia sie w poradniku za kazdym razem, kiedy zaleca sie wykonanie benchmarka:

Benchmark32.png
Benchmark
Benchmark32.png


Ponizej przedstawiamy caly proces wykonania standardowego benchmarka wydajnosci, do celów projektu STEP:

  1. Sprawdz czy w tle dzialaja jakies niepotrzebne programy, aplikacje i procesy. Sprawdz, czy mozliwe jest nadanie programowi antywirusowemu niskiego priorytetu lub ustawienie go na "tryb gry" ("game mode"). Wszystkie procesy dzialajace w tle zabieraja czesc zasobów komputera, które moglyby zostac wykorzystane przez Skyrima. Zwiekszaja one równiez prawdopodobienstwo niestabilnisci gry. Oczywiscie procesy w tle moga byc spokojnie uruchomione, nalezy jednak zawsze wiedziec jakie to procesy, co pózniej pomoze wyeliminowac zródla ewentualnych problemów.
  2. Jesli zainstalowales niedawno jakies modyfikacje i JESLI NIE UZYWASZ DYSKU SSD, zdefragmentuj dysk twardy, na którym zainstalowana jest gra. Pomoze to uniknac "szarpania" podczas rozgrywki (krótkie, ale czeste zacinanie sie gry). UWAGA! NIGDY NIE DEFRAGMENTUJ DYSKÓW SSD!!!
  3. Uruchom Fraps w celu pomiaru FPS (klatek na sekunde). Skonfiguruj zapis pliku dziennika (output log file).
  4. Uruchom GPU-z w celu dokonania pomiarów wydajnosci GPU (procesora na karcie graficznej) oraz pomiarów wydajnosci pamieci. Skonfiguruj zapis pliku dziennika. Wybierz nastepujace parametry (Sensors > Log to File; zapis kazdego z parametrów moze byc ustawiony poprzez odpowiedni wybór z rozwijanego menu):
    • GPU Core Clock (MHz)
    • GPU Temperature (°C)
    • GPU Load (%)
    • Memory Usage (Dedicated) - (czyli pamiec RAM na karcie graficznej, tzw. VRAM)
    • Memory Usage (Dynamic) - (czyli ilosc VRAM odpwrowadzanej do - o wiele wolniejszej - pamieci systemowej RAM)
  5. Uruchom Skyrima i rozpocznij nowa gre. Kiedy gra sie zaladuje i pojawi sie dzwiek oraz licznik FPS, wcisnij przycisk rozpoczynajacy benchamrk FRAPS (domyslnie F11).
  6. Pozwól grze potoczyc sie do pierwszego autosave'u - tuz przed zeskoczeniem z wozu - po czym ponownie wcisnij klawisz benchamrka FRAPS. Spowoduje to zatrzymanie aplikacji. Powinno uplynac okolo 240 sekund od pierwszego uruchomienia benchamrka.
  7. Wyjdz z gry najszybciej jak to tylko mozliwe i natychmiast zamknij aplikacje GPU-z - spowoduje to zaprzestanie dalszego zapisu informacji do pliku dziennika.
  8. Otwórz plik dziennki GPU-Z. Odszukaj miejsce, gdzie wartosc GPU Core Clock po raz pierwszy osiaga maksymalna wartosc oraz miejsce, gdzie wartosci GPU Load oraz Dedicated Memory osiagaja maksymalne wartosci i pozostaja na w miare niezmiennym poziomie. (Powinno to byc okolo 50-90 wierszy od poczatku dziennkia). Wykasuj wszystkie poprzedzajace wiersze.
  9. Przejdz do koncowej czesci dziennkia i wyszukaj miejsce, gdzie wartosci dla GPU Load oraz Dedicated Memory zaczynaja malec (dzieje sie to, kiedy wlaczamy menu i wychodzimy z gry; zwykle jest to okolo 20-40 wierszy danych, zaleznie od tego ile czasu zajelo nam wyjscie z gry i wylaczenie GPU-Z). Wykasuj wszystkie wiersze ponizej. Plik dziennika GPU-Z jest teraz wyczyszczony z "brudnych" danych.
  10. Przenies dane z dziennika GPU-Z do arkusza kalkulacyjengo i oblicz srednia wartosc oraz maksymalna dewiacje dla nastepujacych danych:
    • GPU Load
    • GPU Temperature
    • Memory Usage (Dedicated)
    • Memory Usage (Dynamic)
  11. Otówrz log FPS Fraps i przekopiuj dane do nowej kolumny w arkuszu z danymi GPU-Z.
  12. Przykladowy arkusz do pobrania.
  13. Powyzszy akrusz zawiera kilka kolumn oraz okolo 200 wierszy z danymi. Odpowiednie statystyki to mean (czyli srednia) oraz standard deviation (czyli pomiar rozbieznosci danych wzgledem sredniej). Mozna je obliczyc przez uzycie nastepujacej formuly (wiekszosc programów powinna ja rozpoznac):
 =AVERAGE(A2:A240)
 =STDEV(A2:A240)
Example benchmarks

Wyniki przykladowych benchmarków uzytkowników:

Kelmych
techangel85
z929669

1.E. Instalacja Aplikacji Uzytkowych[edit | edit source]

1.E.2. Better Oblivion Sorting Software[edit | edit source]

Better Oblivion Sorting Software (BOSS) jest jednym z najniezbedniejszych narzedzi sluzacym do zarzadzania modami (pluginami) do Skyrima. Jego glówna funkcja jest zapewnienie wlasciwej kolejnosci ladowania modów podczas uruchamiania gry (tzw. Load Order) oraz nadanie modom tzw. Bash Tags. Sluzy równiez do identyfikacji tych pluginów (czyli plików ESP i ESM, które sa czescia modów), które wymagaja wyczyszczenia oraz podjecia innych, specjalnych akcji (wiecej o tym wkrótce). Pobierz program BOSS i zainstaluj zgodnie z instrukcjami autora.

1.E.3. BOSS Userlist Manager[edit | edit source]

Boss Userlist Manager (BUM) jest narzedziem pomocniczym dla BOSSa - dostarcza graficzny interfejs oraz mozliwosc recznej edycji masterlisty - czyli pliku, którego BOSS uzywa do zdefiniowania kolejnosci wgrywania modów podczas uruchamiania gry (ponownie: Load Order).

1.E.4. Programy zarzadzajace modami (Mod Managers)[edit | edit source]

Istnieje kilka aplikacji, które sluza zarzadzaniu modami i instalacja STEP-a. Co prawda modyfikacje do Skyrima moga byc równiez zainstalowane "recznie", bez pomocy programów - ale ze wzgledów technicznych nie jest to zalecane. STEP jest skomplikowanym przedsiewzieciem i odpowiednie programy sa niezbedne, aby instalcja i setup przebiegly sprawnie i bez problemowo. Program typu mod manager sprawia, ze deinstalacja czy tez aktualizacje modów przebiegaja w znacznie prostszy i kontrolowany sposób. Czynnosci te sa praktycznie niemozliwe do poprawnego wykonania bez uzycia mod managera.

  • Wrye Bash
Wrye Bash (WB) jest prawdopodobnie najbardziej zaawansowana aplikacja, sluzaca to zarzadzania modami. Program posiada mnóstwo opcji, które sa przydatne zarówno dla uzytkowników, jak i dla autorów modów. Dosyc wyczerpujacy poradnik (w jezyku angielskim) znajdziecie Wrye tutaj. Poradnik jest napisany w kontekscie projektu STEP.

W chwili obecnej Wrye Bash nie posiada zautomatyzowanego systemu aktualizacji modów kompatybilnego z serwisem Nexus, tak wiec wszelkie update'y musza byc przeprowadzone przez samego uzytkownika. Aktualizacje modów nie sa niezbedne przy projekcie STEP, a ekipa STEP wrecz ODRADZA zamodzielna aktualzacje pojednynczych modów. Nowe wersje modów sa zawsze sprawdzane i testowane przez ekipe projektu zanim zostana dopuszczone do kolejnej wersji STEP, w celu unikniecia potencjalnych konfliktów i blednego dzialania gry.

  • Mod Organizer
Mod Organizer (MO) jest programem, który posiada szeroki wachlarz róznorakich funkcji i mozliwosci. Na szczególna uwage zasluguje mozliwosc wirtualizacji folderów z zasobami Skyrima, co pozwala na utrzymanie faktycznego folderu z gra w "czystosci". Dzieki tej funkcji program pozwala równiez na stworzenie kilku profilów, kazdy z róznym zestawem aktywnych modów. MO umozliwia równiez integracje z serwisem Nexus, co pozwala na latwe i zautomatyzowane aktualizaje modów. Poradnik Mod Organizer jest oczywiscie dostepny w serwisie STEP.
  • Nexus Mod Manager
Warning-Logo.png
WARNING:
The Nexus Mod Manager (NMM) nie ma wsparcia ze strony ekipy projektu STEP! Powodem jest bark niezbednych, zaawansowanych funkcji pozwalajacych na bezproblemowa instalacje wszystkich niezbednych modów projektu STEP.

1.E.5. TES5Edit[edit | edit source]

TES5Edit to narzedzie, które pozwala na "naprawe" pluginów (plików .esp, które sa czescia wiekszosci modów) w celu unikniecia problemów podczas gry. Prawdopodobientwo zawieszenia sie gry (czasami tuz po uruchomieniu!), wystapienia bledów i konfliktów wzrasta proporcjonalnie do liczby aktywnych modów. Niezbedne jest wiec "wyczyszczenie" niektórych pluginów. Wspomniany wczesniej BOSS potrafi zidentyfikowac pluginy, które wymagaja czyszczenia. Poradnik (w jezyku angielskim) jak wyczyscic mody znajduje sie tutaj.

1.F. Dostosowanie plików INI[edit | edit source]

Pliki konfiguracyjne INI uzywane sa do dostosowania i recznej konfiguracji wielu aspektów gry oraz wspomagaja dzialanie niektórych modów. Ponizsze modyfikacje plików INI maja zastosowanie w wersji Podstawowej STEP. Wersja Wydajnosciowa bedzie wymagac obnizenia niektórych parametrów ustawien, natomiast przy wersji Ekstremalnej STEP mozna te ustawienia zwiekszyc, aby uzyskac lepsze efekty w grze.

Pliki konfiguracyjne INI Skyrima znajduja sie w jednym z nastepujacych katalogów, zaleznie od uzywanego systemu operacyjnego: "Documents/My Games/Skyrim" or "My Documents/My Games/Skyrim,". Standardowe pliki INI zostaly utworzone podczas akcjom podjetym w czesci 1.B poradnika. Ponizsze modyfikacje bazuja na zalozeniu, ze standardowe pliki INI nie byly modyfikowane. Jesli uzywacie Mod Organizera, edycja plików INI odbywa sie przez wybranie opcji [Edit Ini]. Uzytkopwnicy programu Wrye Bash moga zarzadzac i edytowac pliki INI w zakladce INI Tweaks.

Info-Logo.png
NOTE:
Changing settings in the Skyrim Launcher can undo some of the below INI tweaks. To avoid this, make sure to set the INI files as "read only" when all the tweaks are in place.

1.F.1. Skyrim INI[edit | edit source]

Go to the bottom of the Skyrim.ini and create the following:

Increases the distance arrows fly. (From "Arrows and Bolts Tweaks").
[Actor]
fVisibleNavmeshMoveDist=12288.0000
Places the camera just above your character's head in third-person view, and correct the camera angle in third-person view while on horseback. (From "Third Person Horse Camera"). Provides instant camera-angle switching when switching view types or when mounting/dismounting your horse. (from "Instant Camera POV Switching").
[Camera]
fOverShoulderAddY=0.0
fOverShoulderPosZ=18.0
fOverShoulderPosX=0.0
fOverShoulderCombatAddY=0.0
fOverShoulderCombatPosZ=24.0
fOverShoulderCombatPosX=0.0

fOverShoulderHorseAddY=-72.0
fOverShoulderHorsePosZ=50.0
fOverShoulderHorsePosX=35.0
fActorFadeOutLimit=-100

fMouseWheelZoomSpeed=60.0
f1st3rdSwitchDelay=0.95
iHorseTransitionMillis=001
Speeds up the book opening animation, and move the HUD elements closer to the borders of the screen.:
[Interface]
fBookOpenTime=200.0

fSafeZoneX=10
fSafeZoneY=10
fSafeZoneXWide=10
fSafeZoneYWide=10

Add the following under [Combat]:

Shifts the point of aim to the center of the aiming reticule for arrows and crossbows (with this setting targets will be hit where the cursor is placed at approximately 100 feet from the target).
f1PArrowTiltUpAngle=0.7
f3PArrowTiltUpAngle=0.7
f1PBoltTiltUpAngle=0.7
f3PBoltTiltUpAngle=0.7

Add the following under [Display]:

Fixes the shadow flickering issue. Shadow flickering is caused by updating sun shadows.
fSunShadowUpdateTime=0
fSunUpdateThreshold=2.0
Increases the time that blood decals remain visible (tweak from “Enhanced Blood Textures” mod).
fDecalLifetime=512.0
Helps reduce Z-fighting, but may increase clipping, especially with a higher field of view. See Gopher's More Z-fighting video for more information and examples.
fNearDistance=18.0000

Add the following under [General]:

Disables the annoying intro sequence.
sIntroSequence=
Prevents crashes when loading into a large interior area.
iLargeIntRefCount=262144
Helps prevent lighting “pop-in” by pushing back the distance at which the flicker/pulse animation loops begin.
fFlickeringLightDistance=8192

1.F.2. SkyrimPrefs INI[edit | edit source]

Modify the following under [Controls]:

Disable mouse acceleration.
bMouseAcceleration=0

Add the following under [Decals]:

Enables higher resolution blood decals on NPCs.
bDecalsOnSkinnedGeometry=1

Modify the following values under [Display]:

Valid values range from 0 - 7. Lower values will sharpen shadows (not the resolution), making vegetation more "vibrant." It gives a subtle increase in performance, but also gives more pixelated and striping effects to shadows. Higher values will make shadows softer and more blurred. Consider a value of two if using ENB.
iBlurDeferredShadowMask=3
Enables shadows rendering on trees.
bTreesReceiveShadows=1
If running Extreme STEP using 'Ultra' setting for shadow shadow quality to in 1.B.1, this tweak will further improve shadow resolution at a performance cost. Consider also raising 'iShadowMapResolutionSecondary' to 4096 on high-end machines. For Performance or Baseline STEP, do not change the default values for either of these settings.
iShadowMapResolutionPrimary=4096
iShadowMapResolutionSecondary=2048
Improves the blood decals number per scene (from “Enhanced Blood Textures”).
iMaxDecalsPerFrame=256
ENB users ONLY! Enabling these without an ENB will decrease performance with no visual impact and possibly introduce excessive shadow striping.
bDrawLandShadows=1
bFloatPointRenderTarget=1

Modify the following under [TerrainManager]:

Helps reduce Z-fighting, but may increase clipping, especially with a higher field of view. See Gopher's More Z-fighting video for more information and examples.
fBlockMaximumDistance=500000
fBlockLevel1Distance=140000
fBlockLevel0Distance=75000
fSplitDistanceMult=4.0

Modify the following under [MAIN]:

Also helps reduce Z-fighting. See Gopher's More Z-fighting video for more information and examples.
fSkyCellRefFadeDistance=500000.0000
Benchmark32.png
Benchmark
Benchmark32.png


Reminder - Essential Guides[edit | edit source]

The following guides form the base from which STEP builds and provide details on many of the topics mentioned in this Guide.

  1. Skyrim Installation Guide (SIG) – Comprehensive installation and configuration guide to Skyrim and its DLCs, mods, extensions, and utilities.
  2. Wrye Bash Guide (WBG) – A practical, hands-on introduction to Wrye Bash using STEP as a working example.
  3. Mod Organizer Guide (MOG) – A WIP with some advice and troubleshooting suggestions.


Final Notes[edit | edit source]

A Final Consideration

Install mods in the order that they are presented in the following tables in order to achieve an aesthetically and mechanically well-vetted result. More experienced or adventurous modders may want to use STEP as a loose guide.

Information from certain mods used can write additional information into save games. Thus, some mods can continue to affect the game even after the mods are removed or updated.

From the Bethesda document, Skyrim Mod Troubleshooting: Best Practices:

"When you play Skyrim with a mod, in most cases, the new data for the mod will be written into any new saved games you create. For example, if you play Skyrim with Mod X and create a save, the next time you load that save, the game will expect Mod X to also be loaded. If you no longer want to play Skyrim with Mod X, it is best to unload Mod X (by unchecking the plugin under Data Files in your Skyrim launcher) and loading a save that does not require Mod X, usually an older save or a backed up save."

The short version is “Never continue with a save once a mod it relies upon has been removed.” Although this is good advice, there may be occasions when it is inconvenient to revert to an older save. The Troubleshooting Guide provides a "best-practice procedure" for attempting to ‘clean’ the effects of a removed mod from a save game.

FINALLY... ALWAYS read the ReadMe and other mod-related documentation that comes packaged with most mods. This includes the mod description on the Nexus. If the mod author has seen fit and taken time to create these reference materials, then they are relevant and important in the eyes of the mod author. This means that they are relevant and important to you!

STEP 2[edit | edit source]

Mod Installation


Mod Table Reference[edit | edit source]

Below is the legend and reference for the mod tables used in this Guide. Users should refer back to it when confused about a mod listing.

Mod Name Baseline Notes
Mod (patches not required)Wikilink.png Baseline Notes
Mod (requires patches)Wikilink.png Baseline Notes


Mod Table Legend[edit | edit source]

The following is an example of the mod tables, found in Step 2 below, followed by the legend for reading the table. Users should familiarize themselves with this information.

Patch Requirement A green vertical bar indicates that the mod is required by the Step Conflict Resolution Patch, and a red bar indicates that the LW patch is required.
Mod Name Nexus mod name presented as a link to Nexus for download.
Wikilink.png Link to the mod's wiki page, which includes various information about the mod.
Baseline This notes the STEP Baseline version or option of the corresponding mod that should be installed, and usually refers to options affecting performance/quality. General suggestions are located in the "Notes" column; see below.
Quality Indicates if there are lower or higher quality options for the mod relative to the Baseline recommendation:
 LowQuality.png       Relative to Baseline, a lower quality, less demanding version of the mod is also available.
      HighQuality.png  Relative to Baseline, a higher quality, more demanding version of the mod is also available.
 LowQuality.png HighQuality.png  Relative to Baseline, both lower and higher quality versions of the mod are available.
Notes Brief notes that apply to the mod or installation. In some cases, mods with several options will include a suggested option. These suggestions will take the form of: "STEP recommends 'Option A'." In other cases, there may only be one appropriate option, which fits the STEP Mandate. These instructions will take the form of: "Download and install 'Option A'." Users will also see links displayed as: Detailed instructions available. Users should follow these links to find detailed instructions for installing the mod.
Info-Logo.png

NOTE

Consider the following while installing mods:

  • Mods should be installed in the order that they are listed to ensure that mods further down the list overwrite those occurring before them. This is necessary to ensure the desired in-game effect. Mods are otherwise listed in alphabetical order within each section, and any deviations from this are purposeful to achieve the desired outcome.
  • To achieve the best results, “Loose files” (non-BSA) versions of mods should be used. If a "loose files" version is not available, extract the BSA as described here.
  • Always install plugins (ESPs/ESMs) unless otherwise noted. If there are not any notes associated with a particular mod, then all options fit the STEP mandate. The notes only provide instructions where necessary; otherwise, STEP encourages user customization.
  • Unless otherwise stated, follow BOSS's advice with regards to mod cleaning.

2.A. 01-Tools[edit | edit source]

Standalone applications that aid in the management of the modding process
Mod Name Baseline Instructions
BOSSLink to the mod's Wiki page. Detailed Instructions available
It is recommended to install BOSS directly to your Skyrim game directory instead of its default location at the top of your system drive, unless you are using an SSD on which you would rather conserve space. This allows Mod Organizer to automatically detect and add BOSS to your list of executables.

Mod Organizer users:

If you do not want to follow the above advice as to where to install BOSS, do the following in order to add BOSS to the list of executables:

  1. Click the gears icon Gear MO.png. This opens the Modify Executables window.
  2. In the Title field, type BOSS.
  3. For the Binary field, browse to your BOSS installation and select the BOSS GUI.exe application.
  4. Click the Add button. This will add BOSS to your executables list.
  5. Click OK.

Now each time you want to run BOSS, simply select it from the drop-down menu at top right and click Run.

BOSS Userlist ManagerLink to the mod's Wiki page. Detailed Instructions available
Since you must launch BOSS Userlist Manager (BUM) through Mod Organizer in order for it to recognize your mods, add BUM to the list of executables by doing the following:
  1. Click the gears icon Gear MO.png. This opens the Modify Executables window.
  2. In the Title field, type BUM.
  3. For the Binary field, browse to your BUM installation and select the BOSS Userlist Manager.exe application.
  4. Click the Add button. This will add BUM to your executables list.
  5. Click OK.

Now each time you want to run BUM, simply select it from the drop-down menu at top right and click Run.

Wrye BashLink to the mod's Wiki page. Installer version Detailed Instructions available
If updating to 306, you need to uninstall your previous version.

MO users - Install and be certain to tick the stand-alone executable version when prompted for the path to the Steam/Skyrim directory. Wrye Bash users - see the Wrye Bash Guide.

Since you must launch Wrye Bash through Mod Organizer in order for it to recognize your mods, add Wrye Bash to the list of executables by doing the following:

  1. Click the gears icon Gear MO.png. This opens the Modify Executables window.
  2. In the Title field, type Wrye Bash.
  3. For the Binary field, browse to your Wrye Bash installation and select the Wrye Bash.exe application.
  4. Uncheck Close MO when started if necessary.
  5. Click the Add button. This will add Wrye Bash to your executables list.
  6. Click Close.

Now each time you want to run Wrye Bash, simply select it from the drop-down menu at top right and click Run.

Mod OrganizerLink to the mod's Wiki page. Detailed Instructions available
  1. Download Main File from Nexus Mods and run the EXE.
    Windows may issue a warning. If so, click more information and then click [Run Anyway].
  2. Install MO into the Tools using the name: Mod Organizer.

Do not run MO yet! It will be run for the first time later in the guide.

DDSoptLink to the mod's Wiki page. DDSopt - pre-release - update 4 Detailed Instructions available
For users who do not want to do a custom run with DDSopt, STEP now provides the STEP Optimized Vanilla Textures which is installed during in the Fixes section of the STEP Guide. There is no need to run DDSopt if choosing to install this new mod from STEP.

Do NOT run through Mod Organizer!

See DDSopt Guide for usage details. The Quick-Start Guide is a good place to start.

Optimizer TexturesLink to the mod's Wiki page.
TES5EditLink to the mod's Wiki page. Detailed Instructions available
  1. Download TES5Edit from Nexus Mods.
  2. Extract the archive to the xEdit folder: ..Modding/Tools/xEdit

To clean any mods that require it, run "Quick Auto Clean". It will allow users to select the mod to clean and automatically clean it.

Reference videos

Skyrim Performance MonitorLink to the mod's Wiki page. Detailed Instructions available
Installing Skyrim Performance Monitor
  1. Download and install the Microsoft .NET Framework.
  2. Download the mod from the mod page using the download manually link and extract the zip archive.
  3. Install the SlimDX Runtime .NET 2.0 (January 2012).msi included in the archive. (If you're upgrading to a new version of SPM and already have SlimDX installed, there's no need to uninstall/reinstall SlimDX. You can simply skip this step)
  4. Install Skyrim Performance Monitor by running the setup.exe included in the archive.
    • The default install location is in Documents. You may change this according to your preference.

Please remember to completely uninstall any previous versions of SPM prior to upgrading.

Initial Setup of Skyrim Performance Monitor

  1. Launch Skyrim Performance Monitor and click the Setup... button at bottom right.
  2. Select your Primary Gaming Video Card from the drop-down in the Primary Video Card tab.
  3. Go to the Miscellaneous Settings tab.
  4. ENBoost and ENB users should check the Attempt Support for Custom D3D9.dll and Combine TESV and ENBHost System RAM settings.
  5. Click Save

Configuring Skyrim Performance Monitor for Use with Mod Organizer

  1. Launch Skyrim Performance Monitor and click the "Setup..." button at bottom right.
  2. Go to the File Paths tab and point the Skyrim Launcher File Path to your ModOrganizer.exe. Here is an example for Mod Organizer and other launchers.
  3. Click Save.
  4. Click the Launch Skyrim button at bottom right, which will start Mod Organizer (make certain that Mod Organizer is not already running first!). From there you can select your desired profile and run SKSE (or other launcher) to play Skyrim and monitor its performance.

2.C. 02-Extenders[edit | edit source]

Mods that expand on the inherent functionality of a game or another mod without themselves affecting content
Mod Name Baseline Instructions
SKSELink to the mod's Wiki page. Detailed Instructions available
Download and install the latest archive:
  1. Place all *.exe and *.dll files into <skyrim>/ (not the data directory!). Should be three files (i.e., skse_1_9_32.dll, skse_loader.exe, and skse_steam_loader.dll).
    • Click the Archive Archive MO.png button.
    • Browse to and select the downloaded skse archive.
    • In the manual installation prompt, right-click data and select [Set data directory]. It should say it Looks good, and not say No game data at top level.
    • Click OK
  2. Create the SKSE ini file OR download and install it from here.
    • Right-click the SKSE mod in Mod Organizer and select [Open in explorer].
    • Open the SKSE folder or create one if one does not exist.
    • In the SKSE folder, create skse.ini and paste inside it the following:

[Display] iTintTextureResolution=2048 [General] ClearInvalidRegistrations=1

The SKSE folder structure, including the skse.ini should look like the following:

Restart MO; if SKSE is installed correctly, MO will detect it and show in the executables drop down. Use the SKSE executable when launching Skyrim from MO from now on.

2.D. 09-Fixes[edit | edit source]

Mods have a programmatic component that fixes various bugs and/or inconsistencies
Mod Name Baseline Instructions
Ancient Nord Armor FixLink to the mod's Wiki page.
Appropriately Attired JarlsLink to the mod's Wiki page.
Argonian Decapitation FixLink to the mod's Wiki page. This is now covered by USKP 2.0.5.
Barrow Button FixLink to the mod's Wiki page.
Bowlegged Jump FixLink to the mod's Wiki page.
Brawl Bugs PatchLink to the mod's Wiki page. Detailed Instructions available
Only use the "Compatibility Edition" main file. Not necessary for Extended users that are installing Enhanced Blood Textures.
Fast Travel Timescale FixLink to the mod's Wiki page.
NitpickLink to the mod's Wiki page. Users NOT using Mod Organizer should install this mod. The fixes are already included in Mod Organizer.
Unofficial Skyrim PatchLink to the mod's Wiki page.
Unofficial Dawnguard PatchLink to the mod's Wiki page.
Unofficial Hearthfire PatchLink to the mod's Wiki page.
Unofficial Dragonborn PatchLink to the mod's Wiki page.
Acquisitive Soul GemsLink to the mod's Wiki page. Vanilla users: Use the old v2.1 file.
Waterbreathing Breathless EmergeLink to the mod's Wiki page.
Benchmark32.png
Benchmark
Benchmark32.png


2.E. 16-Interface[edit | edit source]

Mods that affect any aspect of the user interface
Mod Name Baseline Instructions
Better Book NamesLink to the mod's Wiki page. Use the "Vanilla Version".

Dawnguard users: Use the "Vanilla - Dawnguard" file.

Dragonborn users: Use the "Vanilla - Dragonborn" file.

Dawnguard and Dragonborn users: Use the "Vanilla - All DLCs" file.

Better Dialogue ControlsLink to the mod's Wiki page.
Better MessageBox ControlsLink to the mod's Wiki page.
Categorized Favorites MenuLink to the mod's Wiki page.
Dungeon Quest AwarenessLink to the mod's Wiki page. May cause minor spoilers.
Immersive HUDLink to the mod's Wiki page.
Lockpicking InterfaceLink to the mod's Wiki page. STEP recommends the without wings around keyhole main file.
Lore-Based Loading ScreensLink to the mod's Wiki page.
Main Font ReplacementLink to the mod's Wiki page. Fertigo Pro DO NOT USE this mod if Skyrim language is not set to English!
Not Another Colored Map Icon ModLink to the mod's Wiki page. STEP recommends installing only the optional "NACMIM - Full" file. Turn off version checking for maps in the MCM: SkyUI menu. This is necessary until NACMIM is made fully compatible with SkyUI 4.0 or higher.
Simple CrosshairLink to the mod's Wiki page. STEP recommends"Normal".
Smaller CursorLink to the mod's Wiki page. STEP recommends the main file.
Benchmark32.png
Benchmark
Benchmark32.png


2.F. 06-Models and Textures[edit | edit source]

Mods that replace existing models or textures

No mods defined.

Benchmark32.png
Benchmark
Benchmark32.png


2.H. 08-Character Appearance[edit | edit source]

Mods that affect the appearance of the player character or NPCs
Mod Name Baseline Instructions
Consistent Older PeopleLink to the mod's Wiki page. Install the Consistent Older People All NPCs USLEEP Main File.
AOF Believable HairLink to the mod's Wiki page.
Better Beast RacesLink to the mod's Wiki page. Lite This mod is not packaged correctly. When installing this mod, right-click on the Data folder and choose [Set data directory]. Okay [OK] to install.
Better FrecklesLink to the mod's Wiki page. This mod is not packaged correctly. When installing this mod, right-click on the Data folder and choose [Set data directory]. Okay [OK] to install.
Birds of SkyrimLink to the mod's Wiki page. Lower resolution
Cover KhajiitsLink to the mod's Wiki page. 1024 Install both Main Files. Merge when asked.
Female Vampires Have FangsLink to the mod's Wiki page.
Frost Atronach HDLink to the mod's Wiki page.
HQ BeardsLink to the mod's Wiki page. Lite
HQ EyebrowsLink to the mod's Wiki page. Ultra light
Natural EyesLink to the mod's Wiki page. 128k
New ChildrenLink to the mod's Wiki page. Detailed Instructions available
Mod is not packaged correctly. Double-click child_detail_dirt. Right-click on data and choose [Set data directory]. Click [OK] to install.
Pond FishLink to the mod's Wiki page.
XCE-DawnguardLink to the mod's Wiki page. This mod is not packaged correctly. Right-click on Data and choose [Set data directory]. Click [OK] to install.
More Village AnimalsLink to the mod's Wiki page. Use all three Main Files.
Benchmark32.png
Benchmark
Benchmark32.png


2.J. 05-Animation and Physics[edit | edit source]

Mods that affect animations or physics

No mods defined.

Benchmark32.png
Benchmark
Benchmark32.png


2.L. 07-Sounds and Music[edit | edit source]

Mods that affect sounds or music

No mods defined.

Benchmark32.png
Benchmark
Benchmark32.png


2.M. 10-Gameplay-General[edit | edit source]

Mods that affect general or multiple gameplay mechanics
Mod Name Baseline Instructions
Ars Metallica-SmithingLink to the mod's Wiki page.
Auto Unequip AmmoLink to the mod's Wiki page. Detailed Instructions available
In the MCM settings for Auto Ammo Unequip, STEP recommends changing following settings:
  • Follower Addon
    • Default: unticked
    • STEP: ticked
      • This will add the mod's functionality to your followers as well.
Candle Lanterns of the NorthLink to the mod's Wiki page. Use the "Dawnguard Edition" file.
Dark Brotherhood to MiscLink to the mod's Wiki page. Currently NOT recommended. Use the optional in Even Better Quest Objectives instead.
Death Cam Duration OptionsLink to the mod's Wiki page.
Disable Thieves Guild AutostartLink to the mod's Wiki page.
Dynamic FiresLink to the mod's Wiki page.
Lantern CaretakersLink to the mod's Wiki page. Requires "Lanterns of Skyrim"
More Salt PleaseLink to the mod's Wiki page. Also install the optional "Dragonborn Addon" file.
Move It DammitLink to the mod's Wiki page. Less Wait Time
No NPC GreetingsLink to the mod's Wiki page. Sligtly Reduced Included in every version of the STEP Patches, STEP Core Patch, STEP Extended Patch, and both versions of the STEP Combined Plugin.
Realistic Crime RadiusLink to the mod's Wiki page.
Wearable LanternsLink to the mod's Wiki page. No BSA
Lanterns for CaravansLink to the mod's Wiki page. No BSA
Lanterns for GuardsLink to the mod's Wiki page. No BSA
When Vampires AttackLink to the mod's Wiki page.
Benchmark32.png
Benchmark
Benchmark32.png


Post-Installation Housekeeping[edit | edit source]

Once all mods have been installed and are ready to play, be certain to either:

  • Start a brand new character, or
  • load the save game generated just after character creation if it exists, or
  • load an existing character after clean saving the relevant save game.


STEP 3[edit | edit source]

Tips & Troubleshooting Common Issues

3.A. Technical Tips[edit | edit source]

The following is a good place to begin, but be certain to also check the Troubleshooting Guide. Also, search the support & Troubleshooting forum on the STEP Boards,

3.A.1. Maximizing STEP[edit | edit source]

A heavily modded Skyrim can bring even a very powerful system to its knees. Maximum visual quality is highly dependent upon total on-card graphics-dedicated video memory (VRAM), the number of GPUs, and monitor resolution. The goal should be to maintain 32 or more FPS on average without any noticeable stuttering. Following are some enhancements that users with rather powerful systems might be able to take advantage of:

  • Try using SSAO (using video driver settings) for better quality graphics and note the performance hit.
  • Use one of the STEP-recommended ENB configurations.
  • Make sure Skyrim.ini and SkyrimPrefs.ini are writable and, using the Skyrim Launcher, max out ...
    • anti-aliasing
    • anisotropic filtering
    • view distances
    • shadow quality
    • texture quality
Info-Logo.png
NOTE:
Starting up the Launcher will overwrite some of the INI settings previously recommended, so those will need to be reset.

3.A.2. Fix game launch crash after installing STEP[edit | edit source]

For crashes to desktop (CTDs),

  • Set the Skyrim executable "TESV.exe" to run as administrator (right click TESV.exe > Properties > Compatibility > Check Run this program as administrator).
  • If using RCRN or any other FXAA-Injector/ENB mod, turn off any on-screen display programs and monitoring tools such as Fraps, ATI Tray Tools, MSI Afterburner, GPU-Z, etc.
  • Get the latest DirectX runtime installed.

3.A.3. Defrag the Hard Drive[edit | edit source]

For hard drives (not SSDs), this is a very important task once most/all mods are installed. The Windows defrag utility may be used, but it is sub-standard. A couple of the best free utilities are Defraggler and Auslogics Disk Defrag. Do NOT defrag an SSD as it will detrimentally affect its lifetime.

3.A.4. Semi-Invisible People & Misbehaving Walls[edit | edit source]

Be certain that ATI Antialiasing is set to Multi-Sample and NOT Adaptive. Also, remember to download the latest ATI drivers. Also be certain that bFloatPointRenderTarget=1 in the SkyrimPrefs.ini if using ENB.

3.A.5. Using Windowed Mode (ATI)[edit | edit source]

If having stuttering problems or CTDs in full screen mode, try "full screen" windowed mode by downloading Simple Borderless Window. The "Simple Borderless Window" launcher SBW.exe launches SKSE, so start the game through SBW.exe.

3.A.6. Increase Overall Performance[edit | edit source]

If after following the whole guide and installing the enhanced graphics, the game is unplayable due to low performance, try one or more of the following:

  • Disable SSAO or Supersampling AA (or both) if enabled.
  • Reduce shadow quality from the Skyrim Launcher.
  • Install the performance-friendly versions of textures where applicable.
  • Consider texture optimization.
  • Reduce The [View Distance] settings in the game launcher (see 1.B.1).

3.A.7. Texture Shimmering, Etc.[edit | edit source]

Refer to the Z-Fighting Guide.

3.B. In-Game Tips[edit | edit source]

The console can be activated by pressing the tilde ([~]) key, often located just below [Escape], while in-game.

3.B.1. Optimize Field of View (FOV)[edit | edit source]

In the console enter the following using a number from 66-100, depending on resolution and screen ratio. Default is 65 (4:3 screens), but 70-75 works nicely for 16:10 screens and 75-80 works nicely for 16:9 screens:

FOV ##

This change will be permanent in the saved game. Other INI FOV tweaks don't require opening the console, but they don’t 'stick' and can corrupt the game. Also note that high FOV can cause a performance drop for some configurations.

3.B.2. BIG Frame Drops During Cell Loading[edit | edit source]

This is a likely indicator that VRAM is too often operating at or beyond capacity (see 3.A.6).

User Contributions[edit | edit source]

How YOU Can Help

STEP can only get bigger and better with help from the user community. Even simply maintaining the current STEP is too much work for the core STEP team to ensure that the highest quality is maintained. We need people to help us identify mods that are thought to improve Skyrim while adhering to the STEP Mandate. We also need ongoing reviews and updates on mods that may be causing problems or that stray from the STEP philosophy. Finally, we need help from the community in terms of testing, benchmarking and analysis. More detail is presented in the Mod Testing Guide.

In order to suggest a mod, visit the Mod Suggestions section of the STEP Forums.

Info-Logo.png

NOTE

The STEP team will be beta testing a new mod-testing procedure and interface currently in final stages of development here on the STEP Wiki. Anyone interested in testing mods of any kind --whether included in STEP or not-- should contact the STEP administrators by email or on the forums (click on the link in upper left of header).
Thank you for reading and enjoy the game!


Special Credits[edit | edit source]

The STEP administrators would sincerely like to thank (from the bottoms of our fuzzy little hearts):

  • The authors of mods recommended in STEP
  • The core STEP Community for feedback, suggestions and input
  • The STEP beta testers ... for their good humor and rigorous analyses
  • The Nexus community
  • Bealdwine, EisDrache & Frihyland - site founders on indefinite leave (we hope you guys are well!)
  • Outstanding v2.2.5 contributors - dstansberry, Eliian, Kelmych, Neovalen, torminater, WilliamImm, Wormheart, and many others.
  • Bethesda Softworks for Skyrim (and TES in general)

Site Donors

We have had a handful of generous user donations to keep this site alive and viable. Most of these donors have not left their user names, so they will remain anonymous; however, the following are site contributors that have generously given a bit of their livelihood in support of STEP. For that, we thank them immensely!

  • geeee785
  • Lauren
  • solist
  • 26 additional generous contributors that will remain anonymous until their user names are made known to us.


The core STEP team is:[edit | edit source]
  • Farlo - Mediawiki developer & extraordinaire, Mod-list co-compiler, forums admin, site founder
  • MontyMM - Solutions developer (Semi-Automatic STEP), site founder
  • stoppingby4now - Main site developer, Semantic Mediawiki developer & extraordinaire, site founder
  • TheCompiler - STEP creator, mod-list extraordinaire
  • z929669 - Wiki & forums content editor, main site administrator, hosting maintenance, site founder
  • STEP Forum moderators: Kelmych, rootsrat, techangel85, torminater

{{#css:MediaWiki:StepGuide.css}}