|This is the Current version of the STEP NoMansSky Guide.
Don't forget to visit STEP on the Nexus to endorse if you are a returning user.
Step NoMansSky Guide
This is the official Step modding guide for No Man's Sky. Its goal is to provide an "enhanced vanilla" look and feel and is built for No Man's Sky on the PC without VR. Other situations by vary.
The following nomenclature is used throughout this guide and should be understood before proceeding.
- 'tick' means 'check': Frequently, the word 'check' or 'checked' can mean 'ensure' in addition to "check mark", so 'check' is not used where it is synonymous with 'tick' to avoid any mistakes that can (and have) happened from this conflation.
The following system requirements are for building and running this Guide at a resolution of 1920x1080 on Ultra settings. These requirements will allow most users to run at these game settings. For those wishing to use high quality settings at resolutions higher than 1920x1080, be advised that a more powerful system will likely be required.
Game/graphic settings used on the system:
- All settings on Ultra
- Antisophic Filter: 16x
- Anit Aliasing: TAA+FXAA
- GTAO: High
- In-flight FOV
- We recommend users turn this up to 85. This will help prevent the HUD clipping on some ships. Users playing at screen resolutions other than 1920x1080 may have to adjust for their systems.
|Windows OS||Windows 10 64-bit||Windows 10 64-bit|
|CPU||Intel Core i5-6600K or equivalent||Intel Core i7-4790 or equivalent|
|System RAM||8 GB||16 GB or higher|
|GPU||Nvidia GTX 970 4GB||Nvidia GTX 1060 or equivalent or better / 4GB VRAM or higher|
|Drive Space||~30 GBs||~50 GBs|
|Monitor Resolution||1920x1080||1920x1080 or higher|
Keep in mind that changes as simple as using a higher monitor resolution can cause a drop in performance.
First, users need to configure a folder structure to support NMS modding. Before doing so, there are a couple considerations:
- Since modding programs can have issues with User Account Control (UAC), Step recommends using a location outside of
C:/Program Files (x86)/.
- Consider the space requirements for modding games, which can be significant. Step recommends using the root of a drive with plenty of space. The root is used to keep the file paths short.
For all our Modding Guides Step recommends users create the following folder:
Drive:/Modding/ (e.g., C:/Modding/). For supporting No Man's Sky, Step recommends creating a sub-folder within the Modding folder and naming it NoMansSky. Now create the folder structure below:
../NMS Modding Station
../Vanilla Game Files
It's recommended to unhide file extensions so that they are visible. This makes working with files much easier when modding.
- Click on the Windows button.
- Type in the search, File Explorer Options.
- Click on the File Explorer Options listing.
- Click the View tab on the window that opens.
- In the Advanced settings pane, remove the checkbox next to Hide extensions for known file types.
Steam is a digital distribution platform and application from Valve used for purchasing, downloading, installing, and playing digital copies of video games. User's can download the program from their website. When installing Steam...
- Users should avoid installation in a location controlled by UAC...
- ...unless the game installation location is changed to a location outside UAC control.
- When choosing an installation location for Steam, keep in mind the space requirements for the games that will be installed.
Steam can be installed one of two ways:
- Purchase the physical copy of the game from a retailer:
- Insert the game disk into your disk drive.
- If the installer doesn't run automatically, open the disk from Explorer and run Setup.exe.
- Follow the on-screen instructions to install Steam (see video link below)
- Download Steam from their website and install it:
- Navigate to the Steam website
- Download the Steam installer.
- Navigate to your downloads location and launch SteamSetup.exe (see video link below).
Moving Steam and Installed Games
Some users may already have Steam installed at
C:/Program Files/ or
C:/Program Files (x86)/. This is okay, as long as the games are installed to a separate location outside UAC control. However, if the game and Steam are installed within these locations, users can utilize Steam to move the installation locations. Follow their instructions on thier website.
Games are installed using the Steam application, and this can be done on one of two ways:
- Users who purchased a physical copy of the game from a retailer should already have the game installed from the Steam installation above.
- Use Steam to download and install:
- Open the Steam application.
- Those who need to purchase a game can use the search bar to search for and purchase it from the app.
- For those who have already purchased a copy of the game, click Library at the top.
- This will reveal a list of purchased games. Games in grey are not installed. Click on the game needing to be installed.
- On the game's page (right pane) click the Install button.
- Check the shortcuts desired and ensure the path is correct (e.g.
- Click [Next], accept any EULA/Agreements, and install the game.
Once the game is installed, it needs to be loaded with the default launcher to register it with the system and create necessary files. To do this:
- Click the Play button on the games page in Steam.
- Load the game to the game menu.
- Exit the game.
Mod support for No Man's Sky is disabled by default, thus, users need to enable support after the game is registered with the system. To do this:
- Navigate to the game's PCBANKS folder (e.g.,
../Steam/steamapps/common/No Man's Sky/GAMEDATA/PCBANKS)
- Locate the DISABLEMODS.TXT file.
- Rename this file: ENABLEMODS.TXT
- In fact, this file can be renamed to anything or simply removed from the folder structure. To disable mod support again, simply rename the file back the the original name, or place it back in the PCBANKS folder. Users will have to do this step every time the game updates because Hello Games resets this file every update.
- If it doesn't exist, create a new folder within PCBANKS and name it MODS.
This completes the initial game setup.
Tools Installation and Setup
Users should install the tools to the location created above (i.e.,
../Modding/NoMansSky/Tools/). Install the following tools to that location:
|MBINCompiler||Detailed Instructions available|
|NMS Modding Station||Detailed Instructions available|
|Windows 10 users should ensure that .NET v4.5.2 or later is installed as NMS Modding Station requires it.
|PSArcTool||Detailed Instructions available|
Users will also require a text editor for editing files. Notepad++ is highly recommended!
MBINCompiler and PSArcTool
The use of these tools are very simple and require no configuration. Drag and drop the supported files onto their EXE files for the applications to execute tasks. MBINCompiler is used for extracting and compressing the game's MBIN files, while PSArcTool does the same for the game's PAK files.
NMS Modding Station
This tool needs to be set up for use.
- Navigate to its EXE and run the the program
- On the Menu Bar, navigate to Setup >> Settings
- Fill in all the paths correctly for the folder used. The following are provided as examples:
- Unpacked Game Files Path:
C:/Modding/NoMansSky/Vanilla Game Files
- MBINCompiler Path:
- Your Projects Path:
- PCBANKS Path:
../Steam/steamapps/common/No Man's Sky/GAMEDATA/PCBANKS
- EXML Editor Path:
- Unpacked Game Files Path:
- Ensure the checkbox for Make Unpacked Game Files Tab Read Only is checked.
- Ensure the pak EXML Files is unchecked. Leaving it unchecked will skip EXML files when compressing PAK files, else they will be included (they're not needed).
- Click [OK] to save the settings.
Unpacking Vanilla Game Files (optional)
This section is optional since all the files required for this guide are included; however, it's important that users know how to perform these steps as the vanilla files may be needed for a variety of reasons while modding. For this, NMS Modding Station is used and it will require ~27GBs of disk space.
Even on SSDs, the unpacking will take several minutes to complete, so give it some time if it looks like it's not doing anything. Users should see "Ready" displayed in the status bar when complete:
- Open NMS Modding Station
- Navigate to Setup and click on [Unpack Game Files].
- If prompted, navigate the desired folder to house the files (e.g.
../Modding/NoMansSky/Vanilla Game Files)
It is advised not to overwrite or alter the vanilla game files to keep them as a vanilla reference. Therefore, copy the vanilla assets for development purposes rather than altering them. These assets can be copied manually, or NMS Modding Station can be used with the added benefit of including the folder structure when doing so:
- Open NMS Modding Station
- Right-click on the desired file
- Select [Copy to Project Path].
- On the prompt, select the project folder to copy the file to (e.g.
- This will "set" the project for the current session. To move additional files to a different project folder, close and reopen the program.
The game files are now ready for fine tuning.
At this point the modding environment should be fully set up and ready to install mods. The mods below are either standalone or require merging files. The mods not being merged into the Guide's project folder (e.g.
..Modding/NoMansSky/StepNoMansSky) can be skipped or replaced by other alternatives; however, if the instructions say to merge any files into the Guide's project folder, then the mod is required and can not be skipped or replaced.
Installing individual mods for NMS is very simple. To do so:
- Download the mod's archive. If downloading from Nexus Mods, download manually.
- Extract only the PAK file from the downloaded archive directly to the
../No Man's Sky/GAMEDATA/PCBANKS/MODS/folder.
Mod Table Legend
- Supported Game Version: NMS:Companions v3.22
Models & Textures
|Clean Analysis Visor||Step recommends: Clean_Analysys_Visor_With_Helmet_by_RogerHN Main File.|
|Clean Ship Space Map|
|Clean Space Origins||Detailed Instructions available|
|Download the mod, and install the following files:
|Exosolars Abyss||Detailed Instructions available|
|LightFix||Soft||Step recommends: _LightFixSoft Main File.|
|Space Station Interior Fix|
Sounds & Music
|No Suit Annoyances||Detailed Instructions available|
This mod is optional but included for players who have experienced all they care to experience from the exosuit audio notifications. The notifications are okay for new players; however, it doesn't seem to take long for most to be annoyed by the constant notices.
There are two options, and either are valid for the guide. 'Step recommends the Main File since it will silence most of the audio, but not all. The Optional File will silence all the audio notifications.
|Better Ship Transfer Ranges||Only install the Better Ship Teleport Module Range Main File.|
|Quick Crates||Detailed Instructions available|
|This is an optional mod, since its goal is fixing an annoyance rather than a bug. It removes the junk (i.e., rust, goo, slime, etc.) from the green drop pods/crates. The material is typically useless and discarded by most players; however, if the material is really needed, it can be found elsewhere.|
Lighting & Weather
|Natural Nights||Detailed Instructions available|
|No Atmosphere No Dust|
|Step NoMansSky Resource Files||Detailed Instructions available|
To wrap up, the resource files need to be be recompiled and compressed into a PAK file so that they can be used by the game. This process can be completed manually or by using NMS Modding Station; however, doing it manually is quicker and easier:
To complete the process manually, PSArcTool is used.
Pack Project Files
- Open the guide's project folder in an Explorer window:
- Select all the files and folders in the project's root folder.
- Drag and drop all selected items onto PSArcTool.exe
- This will compress the files into a PAK file.
- Rename the file to: zStepNoMansSky.PAK
- The "z" is intentional to force the archive to load last.
- Copy and paste the archive into the game's MODS folder:
../No Man's Sky/GAMEDATA/PCBANKS/MODS/
Go...rule the galaxy!
That is a wrap on this short Guide. Enjoy your enhanced gameplay!
The Step administrators would sincerely like to thank (from the bottoms of our fuzzy little hearts):
- The authors of mods recommended within our Guides
- The authors of mods who granted permission for their mods to be incorporated into the Resource Files
- The core Community for feedback, suggestions and input
- The Beta and Mod Testers for their good humor and rigorous analyses
- The Nexus community
- Hello Games for their games
The following mods had open permissions and were either merged into the guide's resource files or used for references:
- Better Base Sites
- Better Buildings Scans
- Better Landings
- Clean Space Origins
- Dig Out - this mod's changes are merged with permission from the author.
- Fast Refiners
- Fine LOD
- Gumsk's Base Building
- Gumsk's Cameras
- Just a little TORCH mod
- Realistic Faster Movement Speed
- Sensible Planetary Charts / Sensible Planetary Charts - Origins
- Starship Out of Range and Faster Scanner
- Ultimate Flight Mod
- ZRatCraft - Flight Modifications
The following staff are associated with this Guide:
- Lead Release Coordinator, Patch Coordinator, Lead Forum Administrator, Mod Author
Step Modifications can only get bigger and better with help from the community. It is very time consuming for the Step team to ensure that our Guides are consistently maintained at the highest quality possible. We need people to help us identify mods that improve the vanilla game while adhering to our Mandate. We also need ongoing bug reports, reviews, and updates on mods that may cause problems or that stray from the Mandate.
In order to suggest a mod for inclusion, visit the Mods section of the Forums.
Call for Mod Testers
Community members interested in becoming Mod Testers, please contact TechAngel85 via PM on the forums. Once registered, Mod Testers will be given access to Staff forums that houses useful information. For more information about our mod testing process, read through the Mod Testing Guide to get a sense of what's involved.
Call for Forum Moderators
Regular community members interested in becoming moderators, please contact TechAngel85 via PM on the forums. Forum Moderators will be determined based upon level and quality of activity within our community.