Jump to content
Sign in to follow this  
chrisvg

Fix for stuttering (not microstutter or 64hz)

Recommended Posts

Hi Kelmych,

 

Thanks for compiling an awesome set of mods, I'm sure quite a few people will be trying it out in the lead up to Fallout 4 coming out later this year!

 

I just wanted to add that I had some terrible stuttering in my installation of FO3 (even just vanilla would do it, but was much more pronounced with mods added).

 

It wasn't the typical microstutter or "64hz" issues.  It happened regardless of any settings that I used for FSE.  I searched all over the place and mostly just found people resigned to the fact that the game engine is crap and therefore you just have to live with the problem.

 

To give a little more detail on the problem I had been experiencing, it would always happen when standing still and panning the camera around with the mouse, I could reproduce it by centering my view over certain parts of the landscape over and over.

 

One spot I used to test this problem is immediately after leaving Vault 101, walk over to the "scenic lookout" sign directly ahead and then center your view over the water tower that is right in front of you.  As you move the view left to right slightly there would be a brief stutter every time. It may start out only being very brief (only a like 1 10th of a second), but the more you repeated the motion, the larger the stutter could become (it would end up "pausing" for up to 3/4 of a second at times).

 

Now, I'm still not quite sure of the cause of the problem, but I found this "mod" on Nexusmods that has fixed it completely for me.  The link to the mod is:

 

https://www.nexusmods.com/fallout3/mods/21141/

 

This mod is basically just an archive of a preconfigured Fallout.ini and enboost (setup for use with GEM).  I am aware that there are a lot of ini tweaks that really have no tangible effect on actual real world performance, so I'm not 100% sure which setting has helped to resolve the issue I was having, but I can say that these configs have completely removed any stuttering I was previously experiencing.

 

Other peoples mileage may vary, but if you're reading this and have been experiencing the same kind of stuttering problem I have described above, give these settings a try.  I hope this post helps some other folks out there that have been pulling their hair out as well!

 

Cheers,

Chris

 

Share this post


Link to post
Share on other sites

As I've mentioned already in other similar topics about stuttering, ENBoost with wrong settings can be a source of heavy stuttering.

I am an AMD gpu user and although I never had any problem with ENBoost in New Vegas, FO3 had always bugged me.

 

Anyway, it's good that you managed to solve your problem but disabling ENBoost in cases of heavy stuttering is a good start at least for those with AMD gpu's.

 

By the way, this mod you posted is a compilation of ini tweaks which I really doubt how could or could not help with stuttering issues. Generally, I avoid messing with ini files too much since you can easily screw your game. Except the multicore added tweak and the ones about decals, you can ignore almost all of the rest. The suggestions on the first part of that mod's description though are really nice. GEM also rocks I use it as well for a really really sharp visual effect!

Edited by Brainfever

Share this post


Link to post
Share on other sites

As I've mentioned already in other similar topics about stuttering, ENBoost with wrong settings can be a source of heavy stuttering...

I second that. I had simiral problems with heavy stuttering like the OP but before I post here for help I tried various ENBoost settings in the [MEMORY] section and problem solved. For me it was the EnableCompression one and 1|2 of the first 3 settings under [MEMORY] but I can't remember which one.

Edited by nameerf

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By sheson
      This is a beta of [FNV|FO3|FO4|FO4VR|TES5|SSE|TES5VR|ENDERAL|ENDERALSE]LODGen/Edit with terrain LOD meshes and textures generation.
      This is for experienced mod authors and users that know how to use xEdit, xLODGen or DynDOLOD already.
      Installation and Setup
      Download
      xLODGen beta 83 - based on 4.1.3g
      Unzip into a dedicated folder outside of any game and Steam folders or special Windows folders like Program Files.
      (Pro users can merge with existing xEdit installation. Make sure to overwrite older LODGen.exe/LODGenx64.exe TexConv.exe/TexConvx64.exe in Edit Scripts. All other files with the same filenames are the same as the latest version of xEdit.)
      Rename xLODGen.exe to [game mode]LODGen.exe (TES5LODGen.exe for example) or start with command line parameter -fnv, -fo3, -fo4, -fo4vr, -tes5, tes5vr, -sse, -enderal, -enderalse
      Use -o:"c:\OutputPath\" command line parameter to change where files are generated to, default is the game folder. Use this if a mod manager with a virtual file system (like MO) is used.
      Do not generate into any game or any mod manager folders that are part (direct or indirect) of the virtual file system.
      Requirements
      Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019 - Required by LODGen.exe/LODGenx64.exe and Texconv.exe/Texconvx64.exe. Get matching platform x86/x64 depending on which xLODGen.exe (x86) or xLODGenx64.exe (x64) is used.
      RTFM and Share Results
      See the included Skyrim-Occlusion-Readme.txt for a brief explanation of the Skyrim TVDT Occlusion data generation. Read the hints that are shown when the mouse pointer rests on a setting. Ask specific questions or give feedback in the dedicated Skyrim TVDT - Occlusion Data thread.
      See the included Terrain-LOD-Readme.txt for a brief explanation of the settings for terrain LOD generation. Read the hints that are shown when the mouse pointer rests on a setting. Ask specific questions about terrain LOD in this thread for a more in-depth explanation if required and share feedback (with screenshots) about results or problems.
      These tools generate LOD meshes and textures "exactly" like CK, but not like the meshes and textures which are shipping with the games (they are often manually edited).
      However, these tools provide more options and higher resolutions (use the x64 version if there are memory errors because you believe you require 4k or higher) and can be updated to add more useful features and options.
      I did some testing in the different games, but finding the best combinations of options and settings requires lots of testing and are a matter of personal opinion and which game is used, the load order, mods, even different worldspaces probably.
      That means, I am only able to give generic guidelines and hints to send you off to find and test for yourself and share your results. My main interested is that generations works correctly and without problems for now.
      Check out the thread xLODGen Terrain Settings Compare. Also refer to any modding guide which has a list of relevant mods close to your load order.
      The object and tree LOD generation is the same as the current versions of xEdit / xLODGen. Refer to their respective descriptions and explanations.
      Obviously, users of Skryim/Enderal/Skyrim SE/Skyrim VR/EnderalSE continue to use the easier and more comprehensive DynDOLOD for drastically improved object and tree LOD generation and only use xLODGen for terrain LOD (and maybe Occlusion) generation.
      First Time
      Here are suggestion to start without going crazy and that should be quick enough to generate:
      Set quality of meshes for LOD4 to 5 and then +5 for each next level. Or just set levels 8/16/32 to 10.
      Check protect cell borders (yes it fixes the ugly terrain drops at outer cell borders that still exist in Fallout 4).
      Use the max vertices setting only if you want to hard limit max file size.
      In Skyrim Special Edition or Skyrim VR, if you notice terrain briefly flickering when new areas are loading in, set [Display] bEnableLandFade=0 in Skyrim.INI
      Set Optimize Unseen to off for LOD4 for first generation. Start experimenting with a value of 550 with a quality setting of 10 or lower for LOD32 (used for map) and compare coastlines and file size to other settings.
      To quickly generate terrain LOD meshes just for the map, check only terrain LOD Meshes, check the Specific Chunk checkbox and set drop down to 32. Leave SW fields empty for complete map or set SW cell coordinates to same values as a *.btr filename to test a specific area with lots of water, river etc.
      Set texture sizes to 512 for a start. Larger sizes and large world spaces will take a considerable time (like 15 to 30 minutes or more easily). Each higher resolution means quadruple the work.
      Use DXT1 for diffuse and 565 (DXT1 if on Windows 7) for normal maps. If generating for Skyrim Special Edition use BC7. Uncheck mipmaps, raise steepness and Bake normal maps.
      For now, leave the Brightness, Contrast and Gamma at 0 and 1.0 respectively. It seems that only Skyrim CK and Skyrim SE CK are manipulating the intensity of the textures to adjust for the noise.dds and the god awful "improved" snow shader of Skyrim SE (just turn that thing off, really). If textures seem too dark in the game, brighten the noise.dds instead or vice versa. That way you can get perfectly matching LOD textures that look just like the textures in the loaded cells. For Skyrim a good average color of the noise texture seems to be around #C0. See below for a couple noise texture downloads.
      If you want to test larger texture sizes, use the chunk option to limit the number of textures that need to be generated. For example, check [x] Specific chunk, leave the drop down empty and set WS to the lower left cell coordinate of an 32x32 area, like 0, 0. It will then generate all textures up to 31,31. Not all worldspaces have their origin at 0,0 so you will have to check already generated meshes/texture filenames for their lower left coordinates.
      Questions and Feedback
      Obliviously anything related to terrain LOD should be posted in this thread.
      Posts related to Occlusion should be made here.
      Recommended Optionals
      TES5-Terrain-Tamriel.esm, SSE-Terrain-Tamriel.esm
      TES5-Terrain-Tamriel-Extend.esm, SSE-Terrain-Tamriel-Extend.esm - These extend the sea of ghost further to the north (see screenshots)
      SSE-Terrain-Tamriel-Full-Extend.esm - Entire map from -96,-96 to 95,96 with northern ocean extension. Useful for mod authors.
      Put in game data folder obviously. Adds back terrain for Skyrim (Tamriel worldspace) at the outer edges so there is no missing terrain meshes/textures when generating terrain LOD for Skyrim.
      Load as early with lowest priority as possible, so that any other plugins overwriting or adding land records or cells with the same coordinates take precedence.
      Only required to be loaded when generating terrain LOD. No harm done when loaded in-game but typically the player can not get close to these areas. There are no effects outside the far away added cells.
      Noise
      Single color flat noise, Adjusted vanilla noise, HD Terrain Noise Texture SE
      Examples for Skyrim. Install to game folder like any other texture mod. The noise texture is applied in-game on top of terrain LOD textures, so no effect for LOD generation.
      Only the red channel is used in case the textures is not a grey channel format. MipMaps are ignored. The textures is tiled 3x3 per LOD quad, e.g. for LOD level 4, the noise texture is repeated 3 times to cover 4 cells, for LOD level 8, the noise texture is repeated 3 times to cover 8 cells and so on.
      Test-Terrain-Tamriel.7z
      For testing terrain LOD distances. Plain color terrain LOD textures for Tamriel with coordinates for every LOD quad. Green for LOD 4, yellow for LOD8, blue for LOD 16 and red for LOD 32.
    • By fireundubh
      I completed my update to the bash tag autodetection script.
       
      Behold: Bash Tagger! View/Download
       
      Supported games:
      Fallout 3 Fallout: New Vegas Skyrim* *Not completely tested; limited support currently

      If anyone is willing test, I'd be grateful for your feedback. Suggestions for a better name are welcome, too.
       
      Requirements:
      xEdit svn1839 or older, or xEdit svn1876 or newer (latest xEdit dev version) patience a credit card Instructions:
      Download the script to your FNVEdit "Edit Scripts" directory. Run FNVEdit and load the plugin you want to test. Right-click that plugin and click Apply Script. Select the script and click OK. Like the original script, you can run the script on only one plugin at a time.
       
      Roadmap:
      v1.1 - Initial release (based on zilav's BASH tags autodetection v1.0 script) v1.4 - Mostly complete TES4 and TES5 support v2.0 - No bugs whatsoever
    • By lv1234
      I have tried forcing fawkes to use the melee option in game but he keeps using his gatling gun. With the melee option, he should be using ranged against enemies far away and melee when enemies are close. I even tried giving him his super sledge but no luck there either. Weirdly enough this goes same for all of my companions even when I force them to use melee. After further testing and narrowing down the issue, it seems that arwen realism is the cause of this issue since this only occurs when arwen realism is activated. Could someone else verify this also?
      Current load order nontest: https://pastebin.com/mTFbdAHt
      Current test load order with arwen realism: https://pastebin.com/
      As for how I Installed the arwen realism mod, I simply installed it by downloading it and adding it through MO2 which prompts a fomod setup install for the mod and chose my selected arwen plugins above accordingly. 
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.