z929669 Posted July 20 Share Posted July 20 Just reporting that a Summary report (DynDOLOD/Summary/) is not generated after successfully running DynDOLOD 173 in my environment. Logs Link to comment Share on other sites More sharing options...
mostwanted11 Posted July 21 Share Posted July 21 I wanna remove grass lods from my save, do I need to make a clean save process or can i just go into an interior and load up the new output instead? Link to comment Share on other sites More sharing options...
sheson Posted July 21 Author Share Posted July 21 7 hours ago, z929669 said: Just reporting that a Summary report (DynDOLOD/Summary/) is not generated after successfully running DynDOLOD 173 in my environment. Logs There are no warning or error messages that match the list of messages that trigger the Summary to be created. Not getting a Summary at the end is the expected behavior when modding properly and only using well made mods with the large reference bugs workarounds. https://dyndolod.info/Messages For certain warning and error messages DynDOLOD and TexGen create a summary of messages and opens it in the default web browser. https://dyndolod.info/Help/Summary-Of-Messages DynDOLOD and TexGen create a summary of some similar warning and error messages for easier review and better understanding. Is there a reason you are generating the terrain heightmap textures? Is there mod that uses them? Link to comment Share on other sites More sharing options...
sheson Posted July 21 Author Share Posted July 21 4 hours ago, mostwanted11 said: I wanna remove grass lods from my save, do I need to make a clean save process or can i just go into an interior and load up the new output instead? https://dyndolod.info/Help/Clean-Save The clean procedure only needs to be done if generating new DynDOLOD output from scratch ... There is no need for a clean save when updating existing DynDOLOD plugins and/or Occlusion.esp. Link to comment Share on other sites More sharing options...
z929669 Posted July 21 Share Posted July 21 5 hours ago, sheson said: There are no warning or error messages that match the list of messages that trigger the Summary to be created. Not getting a Summary at the end is the expected behavior when modding properly and only using well made mods with the large reference bugs workarounds. https://dyndolod.info/Messages For certain warning and error messages DynDOLOD and TexGen create a summary of messages and opens it in the default web browser. Thanks. I presumed that the Summary would be generated if any warnings were triggered, so this is good to know. 5 hours ago, sheson said: Is there a reason you are generating the terrain heightmap textures? Is there mod that uses them? The term "heightmap" is throwing me off here. I wanted the terrain 'underside' in case EVLaS would benefit, and I wanted the 'occlusion' obviously. I'm running WTT and MM, so please educate me on this. Thanks again I see now this setting: ; Set to 1 to create terrain heightmap textures DoTerrainHeightMap=1 I don't recall changing it from the default, so I may have done so in conflating with the next setting: ; Set to 1 to export object LOD heightmaps with LODGen and add its heights to the terrain heightmap textures, requires DoTerrainHeightMap=1 DoObjectHeightMap=1 ... so I'm maybe confusing this with occlusion data. Link to comment Share on other sites More sharing options...
sheson Posted July 21 Author Share Posted July 21 5 hours ago, z929669 said: Thanks. I presumed that the Summary would be generated if any warnings were triggered, so this is good to know. The term "heightmap" is throwing me off here. I wanted the terrain 'underside' in case EVLaS would benefit, and I wanted the 'occlusion' obviously. I'm running WTT and MM, so please educate me on this. Thanks again I see now this setting: ; Set to 1 to create terrain heightmap textures DoTerrainHeightMap=1 I don't recall changing it from the default, so I may have done so in conflating with the next setting: ; Set to 1 to export object LOD heightmaps with LODGen and add its heights to the terrain heightmap textures, requires DoTerrainHeightMap=1 DoObjectHeightMap=1 ... so I'm maybe confusing this with occlusion data. The terrain underside and occlusion are enabled automatically if using the wizard or from the advanced settings. The occlusion generation uses a binary object LOD height map (LODGenHeightMap=1 INI setting) created by LODGen while it generates object LOD, so xLODGen/DynDOLOD do not need to read/process all BTOs anymore. Exporting the heightmap texture (DoTerrainHeightMap=1 with DoObjectHeightMap=1 or not) might be useful for mod authors for further processing. It might be possible that community shaders or something similar could use it for coarse distance shadows/occlusion some day. Though it seems screen space shadows has sufficient results. 1 Link to comment Share on other sites More sharing options...
MarkAim Posted July 24 Share Posted July 24 (edited) Hello I need a bit of help figuring out a CTD issue I'm having. It happens randomly when entering and then leaving a cell. Disabling Dyndolod fixes this issue from all the testing I have done. Here is a Crash Log 1 https://pastebin.com/fdFxcYTD and Crash Log 2 https://pastebin.com/Px1gih72. I have more for different areas too from my testing If needed I will post. Edited July 24 by MarkAim Link to comment Share on other sites More sharing options...
sheson Posted July 24 Author Share Posted July 24 7 minutes ago, MarkAim said: Hello I need a bit of help figuring out a CTD issue I'm having. It happens randomly when entering and then leaving a cell. Disabling Dyndolod fixes this issue from all the testing I have done. Here is a Crash Log 1 https://pastebin.com/fdFxcYTD and Crash Log 2 https://pastebin.com/Px1gih72. I have more for different areas too from my testing If needed I will post. Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log and debug log to upload when making posts. Also upload ..\DynDOLOD\Logs\DynDOLOD_SSE_Object_Report.txt Link to comment Share on other sites More sharing options...
MarkAim Posted July 24 Share Posted July 24 (edited) Sorry about that here are the files https://ufile.io/hknvcf8k https://ufile.io/11czofqt and https://ufile.io/2mrndjbj Edited July 24 by MarkAim Link to comment Share on other sites More sharing options...
sheson Posted July 24 Author Share Posted July 24 31 minutes ago, MarkAim said: Sorry about that here are the files https://ufile.io/hknvcf8k https://ufile.io/11czofqt and https://ufile.io/2mrndjbj The first two links are the TexGen log and debug log, also upload the DynDOLOD log and debug. What mod is Meshes\water\2fmwater1024.nif from? Link to comment Share on other sites More sharing options...
MarkAim Posted July 24 Share Posted July 24 https://ufile.io/5bmcbh2n and https://ufile.io/y19qfgkq As for the 2fmwater1024.nif when checking in Mod Organizer it say from Dyndolod_Output that what was generate when running Dyndolod Link to comment Share on other sites More sharing options...
sheson Posted July 24 Author Share Posted July 24 38 minutes ago, MarkAim said: https://ufile.io/5bmcbh2n and https://ufile.io/y19qfgkq As for the 2fmwater1024.nif when checking in Mod Organizer it say from Dyndolod_Output that what was generate when running Dyndolod The attached archvie contains a new dynamic LOD mesh for that water plane, which you can merge with the existing DynDOLOD Resoures SE 3 installation for example (it will be included in its next version) 2fmwater.zip Once installed, generate new DynDOLOD output, which should hopefully then not try to use the full model for LOD anymore causing issues. If the issue persists upload new crash log, DynDOLOD_SSE_Object_Report.txt, DynDOLOD log and debug log. Link to comment Share on other sites More sharing options...
MarkAim Posted July 25 Share Posted July 25 16 hours ago, sheson said: The attached archvie contains a new dynamic LOD mesh for that water plane, which you can merge with the existing DynDOLOD Resoures SE 3 installation for example (it will be included in its next version) 2fmwater.zip 1.75 kB · 1 download Once installed, generate new DynDOLOD output, which should hopefully then not try to use the full model for LOD anymore causing issues. If the issue persists upload new crash log, DynDOLOD_SSE_Object_Report.txt, DynDOLOD log and debug log. So far not having that CTD so thanks if anything weird happens again in the logs ill let you know Link to comment Share on other sites More sharing options...
sheson Posted July 25 Author Share Posted July 25 1 hour ago, MarkAim said: So far not having that CTD so thanks if anything weird happens again in the logs ill let you know That is great. Thanks for letting us know. Link to comment Share on other sites More sharing options...
Nzymia Posted July 26 Share Posted July 26 Hi! After running Dyndolod Alpha 173 which as far as I can see finished successfully, Loot reports a cyclic interaction between Project Rainforest.esp [Master Flag] and Dyndolod.esm [Master]. Dyndolod_SSE.log and the Dyndolod.esm are available at the link. https://drive.google.com/drive/folders/1awW_aQRQ0--dGKfPJSpw0skT2qGVwiMl?usp=drive_link Thank you for your help in advance. Best regards Nzymia Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now