IskanderStep Posted August 25, 2023 Share Posted August 25, 2023 2 minutes ago, sheson said: Unfortunately the DynDOLOD log and debug log are basically empty, (stopped before loading any plugins) and do not show any LOD generation. The screenshot shows something odd though. The EditorID says it is supposed to be DynDOLOD_GLOW but uses the actual LOD model for the building instead of wrcastleentrance01glow_lod_2.nif. So that is defiantly a problem or bug most likely. To produce the log and debug log generate only object + dynamic LOD for Tamriel. You can skip everything else to make it a bit quicker. I would expect it to still have the issue. Just uploading the hole log folder is perfectly fine. ok, sorry, i deleted everything except Whiterun stuff, because the Zip seemed a bit to big to upload. I have the whole Log though Logs (2).zip Thx for the assistance, this is really appreciated Iskander Link to comment Share on other sites More sharing options...
RASTAPASTA Posted August 25, 2023 Share Posted August 25, 2023 1 hour ago, RASTAPASTA said: I have the ussep vr file/patch but I may have purged and forgot to clean the main plugins will try again soon nm getting access violation when I try to clean ussep lemmie figure this out yea ZEdit gives me an access violation with ussep even though I have patched it with the vr file dose any of this still work? Link to comment Share on other sites More sharing options...
sheson Posted August 25, 2023 Author Share Posted August 25, 2023 2 hours ago, RASTAPASTA said: I have the ussep vr file/patch but I may have purged and forgot to clean the main plugins will try again soon nm getting access violation when I try to clean ussep lemmie figure this out The unofficial patch typically does not need to be cleaned. If you have trouble with using xEdit, make sure to use a recent version and in case of questions or problems consider using its xEdit Discord. I do not provide modding support. Since nothing about Skyrim VR or the tools changed in years, everything is still valid and works the same way. Link to comment Share on other sites More sharing options...
sheson Posted August 25, 2023 Author Share Posted August 25, 2023 1 hour ago, IskanderStep said: ok, sorry, i deleted everything except Whiterun stuff, because the Zip seemed a bit to big to upload. I have the whole Log though Logs (2).zip Thx for the assistance, this is really appreciated Iskander Unfortunately the log and debug log in that archive is almost empty, it stop before loading plugins and does not show the generation. Maybe you upload the wrong archive? Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which entire log and debug log to upload and how to zip and use a file service for large files. Link to comment Share on other sites More sharing options...
IskanderStep Posted August 25, 2023 Share Posted August 25, 2023 4 hours ago, sheson said: Unfortunately the log and debug log in that archive is almost empty, it stop before loading plugins and does not show the generation. Maybe you upload the wrong archive? Read the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which entire log and debug log to upload and how to zip and use a file service for large files. Sorry, was a broken version. https://ufile.io/bewfu5mp I looked into it, and i think it is probably related to seasons or the large ref bug fix, but i am a bit lost Link to comment Share on other sites More sharing options...
RASTAPASTA Posted August 26, 2023 Share Posted August 26, 2023 (edited) so yeah you where right I cant clean ussep but I did manage to use zclean to clean the main plugins and still it made literally no difference. -_- if it all works the same then why for the love of god dose it just not work anymore? I literally have like 5 mods in my load order DynDOLOD_TES5VR_Debug_log.rar Edited August 26, 2023 by RASTAPASTA Link to comment Share on other sites More sharing options...
sheson Posted August 26, 2023 Author Share Posted August 26, 2023 7 minutes ago, RASTAPASTA said: so yeah you where right I cant clean ussep but I did manage to use zclean to clean the main plugins and still it made literally no difference. -_- if it all works the same then why for the love of god dose it just not work anymore? I literally have like 5 mods in my load order DynDOLOD_TES5VR_Debug_log.rar 574.95 kB · 1 download The Skyrim VR vanilla game files are all the same since years. The Skyrim VR - USSEP 4.2.2 and SSE 1.5.97 Compatibility Patch did not change and the instructions how to patch the game plugins did not change since years. The patch is applied before cleaning the game plugins. If the update.esm does not contain the missing form ID, then the patch was not applied to that update.esm. This has nothing to do with DynDOLOD. xEdit/DynDOLOD are just tools that report the error. I do not provide general modding support. I can only tell you what the most likely reasons for the unresolved form ID is. If there are problems with applying the patch, ask the author of the path, its comments or consult with people that use/help with generic modding of Skyrim VR and the patch. Basically everyone who uses Skryim SE mods needs that patch applied. Or follow a modding guide for Skyrim VR or maybe get a wabbajack that contains the basic setup with the patch. Link to comment Share on other sites More sharing options...
RASTAPASTA Posted August 26, 2023 Share Posted August 26, 2023 40 minutes ago, sheson said: The Skyrim VR vanilla game files are all the same since years. The Skyrim VR - USSEP 4.2.2 and SSE 1.5.97 Compatibility Patch did not change and the instructions how to patch the game plugins did not change since years. The patch is applied before cleaning the game plugins. If the update.esm does not contain the missing form ID, then the patch was not applied to that update.esm. This has nothing to do with DynDOLOD. xEdit/DynDOLOD are just tools that report the error. I do not provide general modding support. I can only tell you what the most likely reasons for the unresolved form ID is. If there are problems with applying the patch, ask the author of the path, its comments or consult with people that use/help with generic modding of Skyrim VR and the patch. Basically everyone who uses Skryim SE mods needs that patch applied. Or follow a modding guide for Skyrim VR or maybe get a wabbajack that contains the basic setup with the patch. ok will do thankyou for wat I found so far its one step closer than the last few weeks Link to comment Share on other sites More sharing options...
sheson Posted August 26, 2023 Author Share Posted August 26, 2023 17 hours ago, IskanderStep said: ok, sorry, i deleted everything except Whiterun stuff, because the Zip seemed a bit to big to upload. I have the whole Log though Logs (2).zip Thx for the assistance, this is really appreciated Iskander Thanks! This has something to do with seasons, the simplicity and OCS. There is some odd interaction or bug. Can you upload: from the DynDOLOD output all files that are in the ..\Seasons\*.INI folder. from ..\DynDOLOD\Edit Scripts\Export\ folder all files that start with LODGen_SSE_Export_Tamriel*. Do you know what season is active in the screenshot / when the issue occurs? Link to comment Share on other sites More sharing options...
RainingTacco Posted August 26, 2023 Share Posted August 26, 2023 @sheson Have you ever thought about doing your own grass caching tool and making it a part of dyndolod? And merging that with xlodgen for one big tool that take cares of all LODs? Link to comment Share on other sites More sharing options...
sheson Posted August 26, 2023 Author Share Posted August 26, 2023 52 minutes ago, RainingTacco said: @sheson Have you ever thought about doing your own grass caching tool and making it a part of dyndolod? And merging that with xlodgen for one big tool that take cares of all LODs? I have looked into grass gid generation on and off, since ever meh and I reverse engineered parts of it. However, time/money is an issue. Link to comment Share on other sites More sharing options...
IskanderStep Posted August 26, 2023 Share Posted August 26, 2023 5 hours ago, sheson said: Thanks! This has something to do with seasons, the simplicity and OCS. There is some odd interaction or bug. Can you upload: from the DynDOLOD output all files that are in the ..\Seasons\*.INI folder. from ..\DynDOLOD\Edit Scripts\Export\ folder all files that start with LODGen_SSE_Export_Tamriel*. Do you know what season is active in the screenshot / when the issue occurs? Hi, glad you found something. In game shows me "Turdas 0925 4E 201" -> how that relates to seasons, i dont know.. I think it is Autumn https://ufile.io/xytz5a9z LODGen seasons.zip Thx for your help Link to comment Share on other sites More sharing options...
xbk123 Posted August 26, 2023 Share Posted August 26, 2023 Windmills around Whiterun disapear, only wings remain. Im on steam 1.6.640, Dyndolod alpha 134, Dyndolod DLL NG alpha 11. Lods generated before play. Nothing was added/ updated mid-play. Is this save doomed or can be fixed? I uploaded textgen log but dyndolod log has like 300mb. TexGen_SSE_log.txt Link to comment Share on other sites More sharing options...
sheson Posted August 26, 2023 Author Share Posted August 26, 2023 1 hour ago, IskanderStep said: Hi, glad you found something. In game shows me "Turdas 0925 4E 201" -> how that relates to seasons, i dont know.. I think it is Autumn https://ufile.io/xytz5a9z LODGen seasons.zip 10.68 kB · 0 downloads Thx for your help Hmm, nothing really sticks out. Are you adding/activating any mods after LOD generation? Get this test version https://mega.nz/file/4EZAmJSY#bfnnwoabdhBqRz6QB2vUDIQyeJ6rYtC3ooWpHg5-_dI Clean the log folder and generate again to see if this changes anything. If not, upload new log and debug, or just entire log folder. If not make a new screenshot of the "wrong" LOD castle entrance again. If not open load order in xEdit and put opencitiesskyrimesp_004CF8_Tamriel_DynDOLOD_GLOW (which should the one reported by the console/screenshot) into the Editor ID field on top and hit Enter, Wait a few seconds for the record to show up in the right window. CTRL + left mouse click on entry for the NAME - Base row, WRCastleEntrance01_DynDOLOD_GLOW [STAT:xxxxxxx] to double check it defines lod\whiterun\wrcastleentrance01glow_lod_2.nif and not lod\whiterun\wrcastleentrance01_lod_2.nif as in the screenshot. If that is the case there is a season or base object swap happening. In that case upload all season INIs from the folder ..\Data\Seasons\ shown in MO2 right window data tab. Also upload all *_SWAP.ini in the ..\Data\ folder shown in MO2 right window data tab. Link to comment Share on other sites More sharing options...
sheson Posted August 26, 2023 Author Share Posted August 26, 2023 19 minutes ago, xbk123 said: Windmills around Whiterun disapear, only wings remain. Im on steam 1.6.640, Dyndolod alpha 134, Dyndolod DLL NG alpha 11. Lods generated before play. Nothing was added/ updated mid-play. Is this save doomed or can be fixed? I uploaded textgen log but dyndolod log has like 300mb. TexGen_SSE_log.txt 1.16 MB · 0 downloads See the first post and/or https://dyndolod.info/Official-DynDOLOD-Support-Forum#Post-Logs which DynDOLOD log, debug log and papyrus log to also upload and how to zip and upload large log files to a file service. Also upload c:\Users\[USERNAME]\Documents\My Games\[Skyrim Special Edition|Skyrim VR]\SKSE\DynDOLOD.log as explained in https://dyndolod.info/Help/Large-Reference-Bugs-Workarounds#Testing If there are several versions of the papyrus log and the DynDOLOD.log, upload all of them. Did this happen while being in the active game session? Like all was fine before you traveled away and things were missing after coming back? Or did this happen after saving and loading that save? Did maybe something happen to the SKSE co-save? Make sure to use the latest version of DynDOLOD when generating LOD but also update to the latest version of the DynDOLOD DLL NG and Scripts. You can most likely just "prid" their form IDs in console and "enable" them. prid 0005CA6B enable prid 0001B5CD enable prid 0005CA6C enable Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now