Jump to content
  • 0
sheson

DynDOLOD Skyrim Special Edition

Question

Recommended Posts

  • 0

It maybe teleporting to close and right at the edge of the trigger causing errors. Try tamriel 33 -4 and then walking to it. tgm for god mode to kill the 3 skelotons.

Yes this is how I was reproducing the bug earlier with "coc BonestrewnCrestExterior01" but 02 didn't seem to cause this, seems to me this is a vanilla Skyrim problem. No idea how I messed up my save though, althought I didn't remove or add any mods. I'll be try to fix it soon, the script is busted.

 

uhZfnhz.png

 

It should look like this

 

8eQCC5r.png

 

I spent way too much time chasing this, and it's nothing pretty much. Sorry for the waste of time

Share this post


Link to post
Share on other sites
  • 0

Yes this is how I was reproducing the bug earlier with "coc BonestrewnCrestExterior01" but 02 didn't seem to cause this, seems to me this is a vanilla Skyrim problem. No idea how I messed up my save though, althought I didn't remove or add any mods. I'll be try to fix it soon, the script is busted.

 

 

 

It should look like this

 

 

 

I spent way too much time chasing this, and it's nothing pretty much. Sorry for the waste of time

Have you tried saving near the wordwall, restarting the game without any changes and loading that save again? It worked when saved after I teleported with the cow tamriel 32 -4 and also had the script errors. After loading I got the shout and there we no errors in the papyrus log.

Share this post


Link to post
Share on other sites
  • 0

Have you tried saving near the wordwall, restarting the game without any changes and loading that save again? It worked when saved after I teleported with the cow tamriel 32 -4 and also had the script errors. After loading I got the shout and there we no errors in the papyrus log.

This does fix it but only on new characters not on my existing save game. I just realized something else about it. When I learnt the last word of the shout it taught me "Freeze" the third word rather than "Cold" the second word which is what I needed, and in my menu I see only "Frost" ( the first word ). So that seems to be the source of the problem. No big deal though, as long as this doesn't happen consistently on my future saves, it's fine.

Share this post


Link to post
Share on other sites
  • 0

Hi, first at all, thx for this amazing tool. Skyrim in VR with Dyndolod is AMAZING.

Workaround:

I run dyndolod at high profile, with 3d trees and uLargeRefLODGridSize=11, with the ignorelargeref in the dyndolod settings and without the dynamic option.

 

When im far from whiterun, i can see the roof of dragonsreach, but when i get close, the roof dissapear. (sorry for my poor english) u know what can be?

C7S9KmN.jpg
C9x6QI6.jpg
THX!!!

Share this post


Link to post
Share on other sites
  • 0

Hi, first at all, thx for this amazing tool. Skyrim in VR with Dyndolod is AMAZING.

 

Workaround:

I run dyndolod at high profile, with 3d trees and uLargeRefLODGridSize=11, with the ignorelargeref in the dyndolod settings and without the dynamic option.

 

When im far from whiterun, i can see the roof of dragonsreach, but when i get close, the roof dissapear. (sorry for my poor english) u know what can be?

 

As the manual and the description above the setting explains, IgnoreLargeReferences=1 should only be used with uLargeRefLODGridSize=5

Share this post


Link to post
Share on other sites
  • 0

As the manual and the description above the setting explains, IgnoreLargeReferences=1 should only be used with uLargeRefLODGridSize=5

Thx men, worked!!! im dumb :(....

But now, when im close instead of dissapear the roof, the windows lights (glow?) turn off.

Share this post


Link to post
Share on other sites
  • 0

Thx men, worked!!! im dumb :(....

But now, when im close instead of dissapear the roof, the windows lights (glow?) turn off.

You need to check High for Windows if glow LOD windows should match close up windows perfectly. Refer to the manual.

Share this post


Link to post
Share on other sites
  • 0

You need to check High for Windows if glow LOD windows should match close up windows perfectly. Refer to the manual.

ohh, so that feature is only available if u use dynamic distant object. (I cant activate High because Generate DynDOLOD is disabled)

 

Thx Anyways. Amazing job men!!

Share this post


Link to post
Share on other sites
  • 0

ohh, so that feature is only available if u use dynamic distant object. (I cant activate High because Generate DynDOLOD is disabled)

 

Thx Anyways. Amazing job men!!

From the manual:

 

Check the [x] High option to add glowing windows as dynamic object LOD if applicable.

Share this post


Link to post
Share on other sites
  • 0

cKDyKSB

From the manual:

 

Check the [x] High option to add glowing windows as dynamic object LOD if applicable.

I understood, but the option if disabled if i dont check the "Generate Dyndolod option"

Sbfkjxk.png

Share this post


Link to post
Share on other sites
  • 0

 

I understood, but the option if disabled if i dont check the "Generate Dyndolod option"

 

If dynamic LOD generation is disabled, then glow LOD windows can not be added to it obviously.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Omniguous
      the arguments '-iknowwhatimdoing' and '-allowmasterfilesedit' should NOT be entrenched into the STEP guide.
      for starters: nothing you do with xEdit actually requires the latter one.
      and the first is NOT meant 'simply for disabling a single pop-up': it does much more and the user is /meant/ to -ahem- KNOW WHAT IT IS and WHAT THEY DO. hence, the name.
      This applies to SSE, as well.
      thanks.
    • By sheson
      This is a beta of [FNV|FO3|FO4|FO4VR|TES5|SSE|TES5VR|ENDERAL|ENDERALSE]LODGen/Edit with terrain LOD meshes and textures generation.
      This is for experienced mod authors and users that know how to use xEdit, xLODGen or DynDOLOD already.
      Installation and Setup
      Download
      xLODGen beta 80 - based on 4.1.3g
      Unzip into a dedicated folder outside of any game and Steam folders or special Windows folders like Program Files.
      (Pro users can merge with existing xEdit installation. Make sure to overwrite older LODGen.exe/LODGenx64.exe TexConv.exe/TexConvx64.exe in Edit Scripts. All other files with the same filenames are the same as the latest version of xEdit.)
      Rename xLODGen.exe to [game mode]LODGen.exe (TES5LODGen.exe for example) or start with command line parameter -fnv, -fo3, -fo4, -fo4vr, -tes5, tes5vr, -sse, -enderal, -enderalse
      Use -o:"c:\OutputPath\" command line parameter to change where files are generated to, default is the game folder. Use this if a mod manager with a virtual file system (like MO) is used.
      Do not generate into any game or any mod manager folders that are part (direct or indirect) of the virtual file system.
      Requirements
      Microsoft Visual C++ Redistributable for Visual Studio 2015, 2017 and 2019 - Required by LODGen.exe/LODGenx64.exe and Texconv.exe/Texconvx64.exe. Get matching platform x86/x64 depending on which xLODGen.exe (x86) or xLODGenx64.exe (x64) is used.
      RTFM and Share Results
      See the included Skyrim-Occlusion-Readme.txt for a brief explanation of the Skyrim TVDT Occlusion data generation. Read the hints that are shown when the mouse pointer rests on a setting. Ask specific questions or give feedback in the dedicated Skyrim TVDT - Occlusion Data thread.
      See the included Terrain-LOD-Readme.txt for a brief explanation of the settings for terrain LOD generation. Read the hints that are shown when the mouse pointer rests on a setting. Ask specific questions about terrain LOD in this thread for a more in-depth explanation if required and share feedback (with screenshots) about results or problems.
      These tools generate LOD meshes and textures "exactly" like CK, but not like the meshes and textures which are shipping with the games (they are often manually edited).
      However, these tools provide more options and higher resolutions (use the x64 version if there are memory errors because you believe you require 4k or higher) and can be updated to add more useful features and options.
      I did some testing in the different games, but finding the best combinations of options and settings requires lots of testing and are a matter of personal opinion and which game is used, the load order, mods, even different worldspaces probably.
      That means, I am only able to give generic guidelines and hints to send you off to find and test for yourself and share your results. My main interested is that generations works correctly and without problems for now.
      Check out the thread xLODGen Terrain Settings Compare. Also refer to any modding guide which has a list of relevant mods close to your load order.
      The object and tree LOD generation is the same as the current versions of xEdit / xLODGen. Refer to their respective descriptions and explanations.
      Obviously, users of Skryim/Enderal/Skyrim SE/Skyrim VR/EnderalSE continue to use the easier and more comprehensive DynDOLOD for drastically improved object and tree LOD generation and only use xLODGen for terrain LOD (and maybe Occlusion) generation.
      First Time
      Here are suggestion to start without going crazy and that should be quick enough to generate:
      Set quality of meshes for LOD4 to 5 and then +5 for each next level. Or just set levels 8/16/32 to 10.
      Check protect cell borders (yes it fixes the ugly terrain drops at outer cell borders that still exist in Fallout 4).
      Use the max vertices setting only if you want to hard limit max file size.
      In Skyrim Special Edition or Skyrim VR, if you notice terrain briefly flickering when new areas are loading in, set [Display] bEnableLandFade=0 in Skyrim.INI
      Set Optimize Unseen to off for LOD4 for first generation. Start experimenting with a value of 550 with a quality setting of 10 or lower for LOD32 (used for map) and compare coastlines and file size to other settings.
      To quickly generate terrain LOD meshes just for the map, check only terrain LOD Meshes, check the Specific Chunk checkbox and set drop down to 32. Leave SW fields empty for complete map or set SW cell coordinates to same values as a *.btr filename to test a specific area with lots of water, river etc.
      Set texture sizes to 512 for a start. Larger sizes and large world spaces will take a considerable time (like 15 to 30 minutes or more easily). Each higher resolution means quadruple the work.
      Use DXT1 for diffuse and 565 (DXT5 if on Windows 7) for normal maps. If generating for Skyrim Special Edition use BC7. Uncheck mipmaps, raise steepness and Bake normal maps.
      For now, leave the Brightness, Contrast and Gamma at 0 and 1.0 respectively. It seems that only Skyrim CK and Skyrim SE CK are manipulating the intensity of the textures to adjust for the noise.dds and the god awful "improved" snow shader of Skyrim SE (just turn that thing off, really). If textures seem too dark in the game, brighten the noise.dds instead or vice versa. That way you can get perfectly matching LOD textures that look just like the textures in the loaded cells. For Skyrim a good average color of the noise texture seems to be around #C0. See below for a couple noise texture downloads.
      If you want to test larger texture sizes, use the chunk option to limit the number of textures that need to be generated. For example, check [x] Specific chunk, leave the drop down empty and set WS to the lower left cell coordinate of an 32x32 area, like 0, 0. It will then generate all textures up to 31,31. Not all worldspaces have their origin at 0,0 so you will have to check already generated meshes/texture filenames for their lower left coordinates.
      Questions and Feedback
      Obliviously anything related to terrain LOD should be posted in this thread.
      Posts related to Occlusion should be made here.
      Recommended Optionals
      TES5-Terrain-Tamriel.esm, SSE-Terrain-Tamriel.esm
      TES5-Terrain-Tamriel-Extend.esm, SSE-Terrain-Tamriel-Extend.esm - These extend the sea of ghost further to the north (see screenshots)
      SSE-Terrain-Tamriel-Full-Extend.esm - Entire map from -96,-96 to 95,96 with northern ocean extension. Useful for mod authors.
      Put in game data folder obviously. Adds back terrain for Skyrim (Tamriel worldspace) at the outer edges so there is no missing terrain meshes/textures when generating terrain LOD for Skyrim.
      Load as early with lowest priority as possible, so that any other plugins overwriting or adding land records or cells with the same coordinates take precedence.
      Only required to be loaded when generating terrain LOD. No harm done when loaded in-game but typically the player can not get close to these areas. There are no effects outside the far away added cells.
      Noise
      Single color flat noise, Adjusted vanilla noise, HD Terrain Noise Texture SE
      Examples for Skyrim. Install to game folder like any other texture mod. The noise texture is applied in-game on top of terrain LOD textures, so no effect for LOD generation.
      Only the red channel is used in case the textures is not a grey channel format. MipMaps are ignored. The textures is tiled 3x3 per LOD quad, e.g. for LOD level 4, the noise texture is repeated 3 times to cover 4 cells, for LOD level 8, the noise texture is repeated 3 times to cover 8 cells and so on.
      Test-Terrain-Tamriel.7z
      For testing terrain LOD distances. Plain color terrain LOD textures for Tamriel with coordinates for every LOD quad. Green for LOD 4, yellow for LOD8, blue for LOD 16 and red for LOD 32.
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.